340cudaman1
Member
I'm rebuilding the front susp. I have replaced the bushings on the upper A/Arms already, also the upper balljoints. Next are the lower control arm bushings. I know the torsion bars have to be removed from the control arm (easer said than done). I have heard the bolt that attaches the arm to the front of the frame is some how inside of the bushing and would have to be drilled out or taken to a shop the have the bushings removed and new ones installed. Any help would be appreaciated. This a first for me, never did susp work other than shocks.
340cudaman1:-k
340cudaman1:-k