HEMIRAM
Well-Known Member
Does anyone on here run their setup , what do you think about it as far as good and bad other than price.
So what is better about RMS and how much did you have in the complete setup. I'm not set on any one company just looking for good quality.
When I click on the link to get to the store on the Reilly site it directs back to the home page.
What's one of their setups going for?
-Jon
Do you have to order them or are they in stock to pick up when you want. Sounds like RMS is the way to go.
Do you have to order them or are they in stock to pick up when you want. Sounds like RMS is the way to go.
Thanks fwaugh I will. One last question , do you use the stock trans mount?
gotta order them. you wont be sorry if you go with an alter-k. give bill a call and he will be able to talk with ya and give you prices of what you want. 570-443-7440.
as far as the web site goes i know he was updating it and changing servers in his spare time. figure he must have gotten tied up and not got a chance to finish it.
How much wider is your wheel track from the original? What back spacing did you have to use for the front wheels? That is one of the biggest draw backs of all the aftermarket front end set ups. They make them wider than the original set up. You will have to factor the cost of new rims into the total cost of the front end.
i forget how much wider it is. bill would be able to tell you. i have an older set up. now wilwood makes a different offset hub which puts it real close to stock width. and if your going aftermarket front end like an alter-k then most likely you want handling (although they are great on the drag strip also) and your gonna put new (bigger) wheels on anyway to take advantage of the front end. i mean you don't go putting a R&P set up in a car to run 14" rally wheels right? if you want to run stock side wheels and tires then just keep the stock suspension.
Joe, To me its not about stock wheels and tires, its about "how it looks" Just take a look at the 73 and up A bodies. The front end is wider than the rear!The wider wheel base, in my opinion is not as nice looking as 72 and down. thats all I was trying to say.. I think
Mark
Anybody have an idea of the weight savings vs a stock K frame with the reilly kit?