Idaho
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 2,595
- Reaction score
- 274
I want to run about a 295 x 28" tire on my Demon clone and keep the tire tucked inside the fender, fairly low, say a couple inches of rubber above the fender.
I'm thinking I'll need to relocate the springs inward, and maybe mini-tub.
I'll be building a 360 Magnum to around 400 HP, 4 speed, 4:10 gear. Intent is street use, few track runs. Wondering what spring to use.
I've read that the SS springs raise the rear, and I'm wondering if the relocate will also raise things up. Do I need a Cal-trac and mono leaf or something to keep it low?
I'm thinking I'll need to relocate the springs inward, and maybe mini-tub.
I'll be building a 360 Magnum to around 400 HP, 4 speed, 4:10 gear. Intent is street use, few track runs. Wondering what spring to use.
I've read that the SS springs raise the rear, and I'm wondering if the relocate will also raise things up. Do I need a Cal-trac and mono leaf or something to keep it low?