jcolman
Well-Known Member
I noticed some "soot" buildup on the front of the block, just below the aluminum heads. The heads overhang about 1" over the front of the block.
I'm wondering if I need to retorque the heads or just go ahead and change out the gaskets. This is a fresh engine with around 800 miles or so. 340 motor with edlebrock heads.
Thanks!
I'm wondering if I need to retorque the heads or just go ahead and change out the gaskets. This is a fresh engine with around 800 miles or so. 340 motor with edlebrock heads.
Thanks!