Mopar King
Beginner / Need of Help
As the title saids - I have a slightly small problem with my holley 350 carburetor #2300 on my stock slant six. I was test driving the car when all of a sudden it started to shake like crazy and was losing power until... it actually shutoff. I was close to home and there was no one around so i wasn't blocking traffic. It was driving fine a few mintues ago and then its started to act up. tried starting it but now it refuses to start and sometimes shoots out of the carb when too much gas is pressed. now the car is parked until i can find out why it doesn't want to start.
Im not sure if this is related but when i tested drived the car, the car seems slow and not as responsive (perky) when in stop and go traffic.
Im not sure if this is related but when i tested drived the car, the car seems slow and not as responsive (perky) when in stop and go traffic.
- I did cleaned and check my spark plugs (took gasket rings off)
- gas is going into the carb, shoots good shots of gas,
- gas-line is checked and freeflowing
- checked float level on carb's side and its at the right amount,
- played with needles by closing them / opening them
- checked timing three times and have it at 5 degress btdc
- checked all spark plug wires and there number rotation (summit racing 7mm I believe)