Starting engine without driveshaft hooked up

-

owatajrkiam

Member
Joined
Dec 3, 2010
Messages
22
Reaction score
0
Location
winnipeg,Manitoba
Just installed engine and trans. I've got the rear seal to trans still blocked off so no oil leaks out back. Has anyone ever fired an engine for 10-15 min. just to check for leaks without installing as driveshaft is still in shop being balanced?

Glen
 

Trans will spill fluid unless there is a yoke substitute.
 
You should have a yoke at least in it, because chances are fluid will come pouring out. Not under pressure, but a decent volume.
 
-
Back
Top Bottom