Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Morning Rich
Rare bird here.
Vintage Chrysler Lean burn
Vintage Chrysler Lean burn
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
I’ll at least post vids via YouTube. Not sure about live streaming yet.
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
Completely disagree.
Those “flanged” axles are just as strong and work fine. The only headache is brake changes. ALL the max wedge and super stocks from the factory had those axles. Mopar went away from for ease of use.
The 741 is stronger than a standard ford 9 inch center section. Hell you can’t even touch a 741 open center these days for 100 bucks. And that 741 center can be used in any 8.75
And those flange axles, they’re actually the same housing. Pull the drums, the backing plates are the same. Get a set of Dr Diff axles for 300 bucks and you have a 8.75 for 400 bucks with stronger axles. This is what I did on my polara.
Or you can de-swege the hubs form the drums and be able to work on the brakes as you would any other 8.75
And that appears to be a 62-65 B body axle based on vent location, those with an offset shackle kit will fit the tubs of 70-76 a bodies. So
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
So I’ve decided to finish the house myself with a group of friends. The only thing left on the siding job is just trim, it’s weather tight so I’m not worried about that much
So after power tour, I’m taking my remaining 3 weeks of vacation and getting this thing done. Couple local friends said they’d help me in the evenings some.
Wish me luck but if the damn contracts that I had a lawyer review and write are only enforceable by 6-12 months of court dates, f it. I’ll save the money and headache.
So after power tour, I’m taking my remaining 3 weeks of vacation and getting this thing done. Couple local friends said they’d help me in the evenings some.
Wish me luck but if the damn contracts that I had a lawyer review and write are only enforceable by 6-12 months of court dates, f it. I’ll save the money and headache.
Good Morning Mopar Misguided
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
Hey seen that valence, that the same one you hammered on?
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
So I had my Jeep windshield replaced a while back and lost my 2024 sticker. I emailed Painless Performance, who makes the stickers for power tour, they had an extra left over that they sent me.. for free!
Chris that would look better on a Prius and you would have saved gas also! 
And to top it off you could have been THAT GUY!
And to top it off you could have been THAT GUY!
Yes it is. Looks less dented when stripped. LOL . Today I will Epoxy Primer that and the two fenders...
Mitch look at post 756 on the durablocks
Remember it is D Day! OR DD DAY
Thats a great price on them. Mine are on long term loan as you know!
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
Yeah yeah yeah. A moment of weakness where I briefly thought about buying a Prius… 10 years ago hChris that would look better on a Prius and you would have saved gas also!
And to top it off you could have been THAT GUY!
But no, there’s a guy on the power tour Facebook page driving a class B motorhome. Will not listen to anyone that tells him that Hot Rod will NOT let him in the venues. So the tour already has that “guy”
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
Looks like it turned out great!
There is always room for that OTHER GUY!Yeah yeah yeah. A moment of weakness where I briefly thought about buying a Prius… 10 years ago h
But no, there’s a guy on the power tour Facebook page driving a class B motorhome. Will not listen to anyone that tells him that Hot Rod will NOT let him in the venues. So the tour already has that “guy”
We got one at Carlisle
- Joined
- Jan 19, 2007
- Messages
- 64,179
- Reaction score
- 44,717
lol. Yeah coffee hasn’t kicked in.
That said, you all best be at Carlisle next year… I’m bringing the entire family , already have some VRBOs picked out. Who knows, maybe it’ll be the grand Dart Unveiling.
Hi everyone!
How ya doin Eric....
Good morning. Going to a car show in Minot today, picking up my son and his 2 kids to hang out with me.
Kevin is going with and think he's bringing his 68 Cuda.
Kevin is going with and think he's bringing his 68 Cuda.
morning all!
today sorting wiring and temp tank mounting
find my grease gun to lube the front end
and hopefully move the dart to change the oil,
and test cooling for leaks
all between rain storms predicted
today sorting wiring and temp tank mounting
find my grease gun to lube the front end
and hopefully move the dart to change the oil,
and test cooling for leaks
all between rain storms predicted
-
Similar threads
