Stop in for a cup of coffee

-
Got the battery shut off switch yesterday and it is almost in cannot even see it in the tailpanel unless you are looking for it! Still have to get the metal toward the tailpanel about 3/8" more.
 

Fixin breakfast now for my Young Protege Helper and myself. Doing carpentry work outside today, and want to get done before it gets Hot...
 
halifaxhops said:
I have been nailing the backing plate with a #10 and even tried a chisle to push the end of the axel out of the spider gears against the cross shaft nothing. Just wanted the 2.93 gears! Oh well.
Click to expand...
My passenger side slid right out, but the drivers side was a pain, I used a big wheel puller/bearing puller to remove it, it was stuck good I tell yea..

halifaxhops said:
How do you get the spiders out with a axel in it silly boy!
Click to expand...
Just like the 8 1/4, remove the big pin and rotate till the gears fall out, I do have my complete 7 1/4 I took out of Victoria with only 60.000 miles on it, new drivers side bearings just 2.000 miles.. 3.23 gears
 
Drivers side also, took the pin out it would not let the gears fall out since the one is stuck to the axel or I should say the axel is in it. No biggie spent to much time on it for a $50 set of gears!
 
Hoping got the batt switch in yesterday all the engine wire is done except the nss wires will do those on the lift. Just moving the fuel hoses around today and get the batt wire to the front temp until lift time then it and the vac pump hose will go in some sort of pipe to the front.
 
halifaxhops said:
Hoping got the batt switch in yesterday all the engine wire is done except the nss wires will do those on the lift. Just moving the fuel hoses around today and get the batt wire to the front temp until lift time then it and the vac pump hose will go in some sort of pipe to the front.
Click to expand...
fu(king awesome!! here's to it going without a hitch!!

download.png
 
I apologize for my tardiness in replying. I'm new to this online socializing. Ok I'm new to socializing period. I am greatfull for the folks here though. I,ve certainly picked up a lot of info and am becoming very fond of this site and its people.
 
MomsDuster said:
I apologize for my tardiness in replying. I'm new to this online socializing. Ok I'm new to socializing period. I am greatfull for the folks here though. I,ve certainly picked up a lot of info and am becoming very fond of this site and its people.
Click to expand...
don't get TOO fond - - you've read this thread - we'll burn (flame) you alive!!! LOL
 
You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
389
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
9
Views
668
Sublime one
Sublime one
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
727
Johnny Mac
Johnny Mac
340six
Interested in a different type of build thread
Replies
3
Views
257
340six
340six
HawkRod
2025 Carlisle FxBO Tent Luncheon
2
Replies
26
Views
2K
Kern Dog
Kern Dog
Back
Top Bottom