Stop in for a cup of coffee

-
Ok... Im headed out to the Shop. Seez Y'all !!
Looks like rain all day and into tomorrow morning, so no outside work. I'll prob spend some time cleaning up the garage later. It was already a mess as usual, but with no ceiling, everything in there is now covered with splinters and roof dirt after the re-shingle job. Might try to clear the front so I have the option of pulling the Magnum at least halfway in to do the condenser tomorrow. Should be good to do it outside though.
 
Looks like rain all day and into tomorrow morning, so no outside work. I'll prob spend some time cleaning up the garage later. It was already a mess as usual, but with no ceiling, everything in there is now covered with splinters and roof dirt after the re-shingle job. Might try to clear the front so I have the option of pulling the Magnum at least halfway in to do the condenser tomorrow. Should be good to do it outside though.
Sounds like a crappy clean up job.. yuck..
 
I have a morning question. If you are putting a quarter panel on. And you sand off the paint to weld it on. I have an over lap. do you coat it with anything or what keeps it from rusting?
 
I use welding primer myself.

Hey Ron sent me this yesterday thought it was a package for Anders!

56252__1.jpg
 

Here the bigger Napa has it, doubt the others would. Body supplier would definitely have it.
 
-
Back
Top Bottom