Stop in for a cup of coffee

[No name needed]

Yeah well I just acquired for free, an entire flat bed trailer load of oak shipping pallets....... very nice oak

So you were just given a load of hard wood.

 

[ScampMike]

So you were just given a load of hard wood.

apparently it's an acquired taste..

 

[dukeboy440]

huummm.. you might be a hoarder if...

For?

So you were just given a load of hard wood.

Haha yes.

Well originally I was just gonna cut them up for fire wood. But as nice as these are, I may break them down and build my kids a playhouse or something.

Each pallet is made from oak and from 4x6s and 2x6s . They're 6ft wide, 12 ft long

 

[dukeboy440]

huummm.. you might be a hoarder if...

Not really, these actually had a purpose when I was asked if I'd want them.

 

[No name needed]

apparently it's an acquired taste..

Depends on where it's delivered.

 

[No name needed]

Haha yes.

Well originally I was just gonna cut them up for fire wood. But as nice as these are, I may break them down and build my kids a playhouse or something.

Each pallet is made from oak and from 4x6s and 2x6s . They're 6ft wide, 12 ft long

Good score.

 

[ScampMike]

Depends on where it's delivered.

true - those who ask for it do seem to enjoy a properly delivered piece of hard wood..

 

[No name needed]

true - those who ask for it do seem to enjoy a properly delivered piece of hard wood..

In the film industry if you are injured in action you get a purple head award.

 

[dukeboy440]

In the film industry if you are injured in action you get a purple head award.

 

[ScampMike]

In the film industry if you are injured in action you get a purple head award.

ya gotta do what you gotta do to get better...

 

[dukeboy440]

So each pallet has 3 12foot 4x6s, there's at least 40 pallets... I dang near could build a shop

 

[Ben Drinkin]

So each pallet has 3 12foot 4x6s, there's at least 40 pallets... I dang near could build a shop

Sounds like an axle bender...

 

[Ben Drinkin]

I bought a tanden axle utility trailer at a police auction. It was way overloaded with shingles.. paid 85 bucks for it. Took 6 trips to the dump to get rid of the crap. Both axles were bent nearly to the ground. Replaced 60 bucks worth of floor and bent the axles 'near straight', 2 used tires and sold it for 950 a week later.. poor bastard didn't know what hit him...

 

[Mopar Tim]

I think this is a video

 

[ScampMike]

I think this is a video

sounds good!!!

 

[ScampMike]

I actually expected it to "lope" a bit harder than that... do you know what is under there for exhaust?

 

[Ddaddy]

better pic

View attachment 1715008605

Yeah, that's a hot cam. 2 steps over what was in my GTS when I got it. No wonder yours has a high stall converter in there...I put a 2500 stall in mine and it still wasn't high enough for the cam, so I swapped the cam for a step down to match the converter.

 

[Mopar Tim]

It is cold and idling 2 grand. If it was warm it would lope a lot more. TTI headers and flowmaster 60 with 3 inch pipe to the rear.

 

[Ddaddy]

I actually expected it to "lope" a bit harder than that... do you know what is under there for exhaust?

Sounds like it has an X or H pipe. That's about what mine sounded like before I swapped the cam.

 

[Mopar Tim]

Sounds like it has an X or H pipe. That's about what mine sounded like before I swapped the cam.

No X pipe.

 

[Mopar Tim]

Has Rhino Lining for under coat. Cool.

 

[zkx14]

I actually expected it to "lope" a bit harder than that... do you know what is under there for exhaust?

I don't know... Was shakin up the speaker on my phone pretty good.

 

[Mopar Tim]

Sure 'Aint smooth!

 

[ScampMike]

It is cold and idling 2 grand. If it was warm it would lope a lot more. TTI headers and flowmaster 60 with 3 inch pipe to the rear.

similar to mine - in build and sound - that car is going to be mighty dang quick!

 

[Mopar Tim]

Has Eddie heads, looks like an Air Gap intake. MSD Dist. AL6.