Stop in for a cup of coffee

-
Mopar Tim said:
I will have to reschedule if it is raining hard here. Might be. This engine was assembled by Boggess Performance Racing Engines | Facebook and 12grand was put into the engine build, per receipts.
Click to expand...
If you have the full engine specs and rear specs plus tire/wheel specs, I could probably make a better guess. I already have cam and carb info from your previous posts.
 
Ddaddy said:
If you have the full engine specs and rear specs plus tire/wheel specs, I could probably make a better guess. I already have cam and carb info from your previous posts.
Click to expand...
I only have how much was spent, not on what. Total bill paid, called builder to find out more, but no answer. 8.75 with 3:55 sure grip. Engine is fresh tho. Less then 1 year old.
 
Mopar Tim said:
I only have how much was spent, not on what. Total bill paid, called builder to find out more, but no answer. 8.75 with 3:55 sure grip. Engine is fresh tho. Less then 1 year old.
Click to expand...
Ok, in the absence of any more data I will stick with my original estimate. I can't wait to see what the real numbers are from the dyno...
 
Eddie RPM heads, ported polished, on receipt. Eddie RPM air gap intake. MSD Dist, 6AL digital. TTI headers, 3 inch pipe, Flowmaster 60 mufflers.
 
Mopar Tim said:
Eddie RPM heads, ported polished, on receipt. Eddie RPM air gap intake. MSD Dist, 6AL digital. TTI headers, 3 inch pipe, Flowmaster 60 mufflers.
Click to expand...
Ya, I saw all that but it doesn't change my guess any. I need to know stuff like compression ratio, timing chain, fuel pump type, etc to modify it any.

Even if it's a 500 hp engine, with losses and rear gear ratio, I don't think my numbers are far off. Reality will probably lie between what I guessed and what you did.

Either way, it's one helluva sweet ride with a healthy power plant!

:thumbsup:
 
I just checked the temp outside - it should be an interesting ride to work today.. we had that "storm" Tuesday into Wednesday and it was warm enough to cause melting yesterday - right now it is exactly 32*... ruht roh
 
ScampMike said:
I just checked the temp outside - it should be an interesting ride to work today.. we had that "storm" Tuesday into Wednesday and it was warm enough to cause melting yesterday - right now it is exactly 32*... ruht roh
Click to expand...
Usually the roads are pretty good at 32 and a few below with all the salt they use around here. Unless it was hard packed and temp is rizing. Then you get the wet film over ice. 40 here now
 

GeorgeH said:
:rofl::rofl::rofl: is wrong to show my duster some luv? lol
Click to expand...
I didn't know you had Luv..
1974_Chevy_Luv_Mikado_Isuzu_Pickup_For_Sale_resize.jpg
 
You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
559
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
867
Chargervert
C
T
Anyone buy a group of about 8 A body parts cars out of southwest PA this past summer?
2
Replies
39
Views
1K
Killer6
K
CS1121
Body seam
Replies
13
Views
339
MOPARMITCH
MOPARMITCH
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
772
Johnny Mac
Johnny Mac
Back
Top Bottom