Stop in for a cup of coffee

[straightlinespeed]

Me too!! can look back now

And wipe your own *** now! See 2 good things came from that!

 

[ScampMike]

I miss my bike, but I had 2 close calls on the freeway and that makes me not miss it..

this is why I like my 4spd - doesn't highway for **** - and that's ok

 

[ScampMike]

At least you kept a positive attitude...

I knew that was coming!

 

[GeorgeH]

@ ddaddy

 

[GeorgeH]

I knew that was coming!

you don't know how many Fonzie jokes I heard

 

[straightlinespeed]

LOL, classic Dave!

 

[ScampMike]

you don't know how many Fonzie jokes I heard

never would have thought of it....

 

[GeorgeH]

never would have thought of it....

 

[Ddaddy]

you don't know how many Fonzie jokes I heard

That's the first thing I thought of when I saw the pic..."Heyyyyy..."

 

[krazykuda]

it could be worse Karl

View attachment 1715041793

Thanks...

that helps me realize that it could be worse...

misery loves company....

 

[dukeboy440]

Im going to pretend you didnt say that, mine are reversed to allow clearance for the sway bar.

Ruh roh......

 

[Ddaddy]

Did you guys watch this? IT WORKS! I used a Dewalt heat gun and a spray bottle of water set on mist because I don't own a steamer. You can just watch the foam rise and the creases disappear. I think this would work GREAT when you are replacing seat covers. You may be able to use your old foam!

Before:

View attachment 1715041756

After:

View attachment 1715041757

I actually used to do that trick back when I owned the Auto Upholstery business. We would also put the new covers on and then run the steam wand up inside the covers to expand the foam and get a nice tight fit before finishing with the hog rings.

 

[ScampMike]

misery loves company....

-- maybe that's the common thread in this thread...

 

[straightlinespeed]

Ruh roh......

Im guessing those issues are with that rack in specific

 

[ScampMike]

Im guessing those issues are with that rack in specific

rack issues - what??? TMI

 

[dukeboy440]

Im guessing those issues are with that rack in specific

No. Are you running anything else aftermarket IE adjustable strut bars or uppers or even off set bushings

 

[ScampMike]

Thanks...

that helps me realize that it could be worse...

misery loves company....

first time your left hand slips - you'll see what worse is...

 

[Ddaddy]

-- maybe that's the common thread in this thread...

I always thought it was Insanity always wants someone else to share the madness with in order to feel 'normal'...

 

[ScampMike]

how ya gonna get that **** off your hand when you can't rub them together in soap and water...... yea yea... SEE!?

 

[ScampMike]

I always thought it was Insanity always wants someone else to share the madness with in order to feel 'normal'...

well yea, there's that too

 

[Ddaddy]

rack issues - what??? TMI

There are never any issues with a good rack...

 

[ScampMike]

 

[krazykuda]

it could be worse Karl

View attachment 1715041793

Here"s the temp cast that I have now...

 

[Ddaddy]

well yea, there's that too

 

[straightlinespeed]

rack issues - what??? TMI

I'll check out any rack to make sure its good!

No. Are you running anything else aftermarket IE adjustable strut bars or uppers or even off set bushings

No, no, and no. Now my front suspension is a mix match. Im running 72 down K member, with 73 up steering. It was recommended on here on numerous threads to reverse them, to allow the clearance so the calipers dont hit the sway bar when at full turn.