Stop in for a cup of coffee

-
Chris, i really dont want to ask, but it happens more often than you think, did you check to make sure chains were on correct direction?
This topic came up a couple weeks ago with a long time wood cutter i know.a couple saws with chains on backwards and no one had the nerve to tell him.

Reminds me of the tiller that was given to me. Old guy hated that thing,was rough and wouldnt dig.
Tines were backwards. Never did tell him...
 
Tooljunkie said:
Chris, i really dont want to ask, but it happens more often than you think, did you check to make sure chains were on correct direction?
This topic came up a couple weeks ago with a long time wood cutter i know.a couple saws with chains on backwards and no one had the nerve to tell him.

Reminds me of the tiller that was given to me. Old guy hated that thing,was rough and wouldnt dig.
Tines were backwards. Never did tell him...
Click to expand...
ive done that before. But not in this case.
 
Tooljunkie said:
Super aggressive fast cutting chain?
If your saw and bar combination
Takes 3/8,.050 chain then thats what it takes.
The safety chain im sure has never been on any of your saws.
Its useless.
3/8.058 chain is one chain made to fit the guage and pitch. A ripping chain is usually a reground chain with almost a square cut to keep it from following the grain in the wood.

I would like to see a good close up photo of your burned up chain,
Especially the condition of the cutting link.
Click to expand...
There’s several different types. Usually comes down to the pitch, the angle, side cut or not. The ones I have are the stock standard, the RS and then the big saw has RSK type stihl chains. Both cut way faster than the standard chains.
 
I have a Foley Belsaw sharpener, love that thing you can adjust the teeth aggressive or not depending how you need it. They are around on CL look for a 1055 machine usually 150-200. Does most of the sharpening you will ever need. (drill bits, scissors, clippers, blades, Circular saw blades, shears, etc)
 
halifaxhops said:
I have a Foley Belsaw sharpener, love that thing you can adjust the teeth aggressive or not depending how you need it. They are around on CL look for a 1055 machine usually 150-200. Does most of the sharpening you will ever need. (drill bits, scissors, clippers, blades, Circular saw blades, shears, etc)
Click to expand...
Nice, we’ve got two dedicated chain sharpeners. One is stihl specific and the other will do the other types.
 
A lot of guys I know use the clamp on file types and it does not file the guide part down and they wonder why it will not cut!:rofl:
 
Morning Crew...Hope all is welll. We get patches of ironwood up here too. Wreaks havoc on the loggers. I know my brother and his old crew used to cut what they could and all was used for road bedding for the skidderes. It may be worth money to someone but it is very hard on the tools.
 
halifaxhops said:
A lot of guys I know use the clamp on file types and it does not file the guide part down and they wonder why it will not cut!:rofl:
Click to expand...
Rakers always need to be taken down a little. Damn! Coffe is ready...
 
71GSSDemon said:
Morning Crew...Hope all is welll. We get patches of ironwood up here too. Wreaks havoc on the loggers. I know my brother and his old crew used to cut what they could and all was used for road bedding for the skidderes. It may be worth money to someone but it is very hard on the tools.
Click to expand...
I think I mostly have Morning Wood here......:lol:
 
Shortly i get to resume my regular routine,cross bridge for coffee. Going to be a busy week.
 
MOPARMITCH said:
I think I mostly have Birthday Wood here......:lol:
Click to expand...
6c5b5d18549d5df242697e5d56da16f0--senior-citizen-humor-old-age-quotes.jpg
 

You must log in or register to reply here.
-

Similar threads

E
ESPO Springs n Things
Replies
16
Views
410
RustyRatRod
RustyRatRod
ocdart
Bye, bye Parnelli...there's a spot on the front row waiting for you
Replies
12
Views
766
Chargervert
C
Johnny Mac
Stop in and see BluePrint Engines at Carlisle 2025! First time attending! Show Specials :)
Replies
8
Views
737
Johnny Mac
Johnny Mac
340six
Interested in a different type of build thread
Replies
3
Views
267
340six
340six
HawkRod
2025 Carlisle FxBO Tent Luncheon
2
Replies
26
Views
2K
Kern Dog
Kern Dog
Back
Top Bottom