zkx14
Duster De-ruster
I would have used the same as Tim, but my color looked better over gray/black
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
zkx14
Duster De-ruster
I hope that # is reversed, but a bit high for a 'normal'...Hammer paint it no primer needed!
Well that was uneventful at the VA. My blood pressure was 100/146 as usual.
IWe used that primer on Rons frame I really liked it a lot. Never had any great results with the stuff you used. Way to thick usually and needs major thinning in my experience. I have a Sherwin Williams account now and they sell some decent stuff in their name. Prob use it on the Cuda whenever that time comes.
zkx14
Duster De-ruster
Which one?
Always has been high, Since the day I was Married. Seriously blame it on the high stress jobs I have had most of my adult life.
That's why I just don't give a crap about much now. Drama free man, drama free.
Dave Glad to see yours is better today.
The primer filler you used Keefer.
zkx14
Duster De-ruster
That level won't hurt anything-if it stays steady. Problem is it puts you too close to a danger zone level if it goes up from there.
My doc was more concerned that mine was doing a yo-yo.
Really what have we come to? #3
greaseing the ball joints , tie rods ?
greaseing the ball joints , tie rods ?
It has always been high. Been to the VA and once they called a ambulance for me because of it. Guess four cups of coffee and a few cigs on the ride there is a bad thing! Pretty funny actually when they said I cant refuse it!
Keith you still have that old control unit we were fooling with? I would like to put it through a temp swing and see if it fails since that tester I got works.
I wonder if I can spray the one tim had and then spray the grey over the top since its a high build
Dont know about that...
Yesterday mine was 121 over 85. Not bad for an old guy....
I would be worried about peeling with to much primer then what will the paint do to it after it is on. Good question for a body supply house locally. I know the guy down the street is very adamant about the right primer made for the paint.
Got to run, I have to see a man about a car.....
I was in the same thought. BUT what I did worked great.... First time I tried what I did... The damn primer can cost as much as the color!
Me to the shop should be about 55 or so now!
About 100 a gallon here off the shelf. SW I get 40% discount so it helps a bunch.
Paint is crazy, looked at the teal for the cuda, about 400 a gallon for good quality. Prob going to have to go that way with this car.
Eastwood has the color I want for 100 per gallon
zkx14
Duster De-ruster
anybody see this?
zkx14
Duster De-ruster
? why. Maybe other way around? The 'rusty metal' is pretty high solids and will build fine by itself. My color just got weird over another red.
lilfontleroy
annoyinglilLeroy
yep thought of this place instantly theres another one but I cant find it
zkx14
Duster De-ruster
what's a grease gun?
zkx14
Duster De-ruster
That sounds too cheap. Latex? lol
-
Similar threads
