zkx14
Duster De-ruster
I made bacon and French toast. Mmmm
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
zkx14
Duster De-ruster
He better have done that. Laundry was #1 on his to-do list!Make sure to get all the 'stray' panties and bras off the floor before she comes home...
@ZMan67S 
And the magic begins.
Be a good day to send him a dozen Turkeys!
zkx14
Duster De-ruster
I always suspected my paint did not bond to the primer very well. It took 2 years, but saw this today.
Should have done sealer...Will get some touch up on it later to hopefully keep it from getting worse. Hope to get a few years out of this paint job before I have to re paint.
Should have done sealer...Will get some touch up on it later to hopefully keep it from getting worse. Hope to get a few years out of this paint job before I have to re paint.
Dam is that where we were getting a reaction?
zkx14
Duster De-ruster
And with a little luck, maybe he can pick up again tomorrow!He better have done that. Laundry was #1 on his to-do list!
You kidding he is married!And with a little luck, maybe he can pick up again tomorrow!
zkx14
Duster De-ruster
Ok, LOT of luck...
Unconventional
Well-Known Member
Going to be another warm day, may take the Duster out for a shake down cruise after church. Probably be a short cruise with fuel @ $4.19 a gallon.
I could see my breath last night while viewing the USAC Sprints
. Man, them guys tore up a lot of iron last night. After the third red flag in the Main I fleed the scene. That flag was for the new Olympic event, "Synchronized Sprint Car Tumbling". Gotta love that open wheel racing.
zkx14
Duster De-ruster
Nope. that's on the roof right behind the canopy top. It looked good there.
Unconventional
Well-Known Member
A chance of thunderstorms tonight and tomorrow? That's really odd for this time of year in this neighborhood. I think maybe my friend brought that s%&t back on the plane from Tennessee when he returned yesterday
Unconventional
Well-Known Member
I think he got a little carried away on the 0's
You have to seeeee it!
So I'm gonna do an impromptu poll. Dropped my block off at the machine shop, they tore it down and discovered 1 crank journal was a little rough requiring grinding. How long should it take to regrind the crank and assemble a block? Just doing rings and bearings on a 400 mopar. Thanks for any reply.
Ben Drinkin
Hey bartender!
no more than week. It's a two day job at best. .
No with her knowledge and expertise she could get those guys talking. She has always impressed me.
Those rear quarters for the convertibles were a little different year to year with look and shape. Each 67-69 had three screw holes along the top edge of the panel. Seems the middle one usually cracked when over tightened.
Building a Burn Barrel for burning all those Docs I have piled up in my Office....Pics and details to come.....
Ben Drinkin
Hey bartender!
i like pics of tail!
Adding air to assist the burn really helps.just sayin.
So, got a trunk lid,its not great.
Between the 2 i have and maybe if the parts car deal comes through i may have a decent one.
Guy contacted me about the parts car,going to check it out next sunday.
Pulled 5 boats out of storage,
Brought in a couple cars to order parts and write up quotes.
Between the 2 i have and maybe if the parts car deal comes through i may have a decent one.
Guy contacted me about the parts car,going to check it out next sunday.
Pulled 5 boats out of storage,
Brought in a couple cars to order parts and write up quotes.
-
Similar threads
