Holly smoke the girl has some really long fingers.
Ya and that too.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Ya and that too.
Good Morning All! Took today off for Dish appt. and have to fix the RV toilet, how's that for a day off?
Sounds like a good day off of work to me
but I have never had to work on a toilet in a RV, sounds like a possible chitty job 
MomsDuster
Well-Known Member
I can relate. Seems that the only days I’ve been taking off are to take care of crap that I can’t do on weekends. And it’s usually for someone else in the family. Just grateful I have the time at work to burn and I’m not loosing any pay.
Good morning c\_/. Spent a good part of yesterday killing weeds w/ roundup. One gallon jug with battery powered sprayer, shoulder strap through jug handle. Strained the left side of my back and neck. Started hurting about sundown. Didn't sleep good at all. Dunno,,, never happened before. No humpday for me. Yall have a good one.
As far as the Dish appt., I kinda brought it on myself by moving it. Had to move it before when driveway was roughed in, now with spring leaves is pixelating so tried moving it back where it was, lost satellite.
Theres an app for that. It gets you close then you fine tune it with the sat signal meter built into the receiver. I have never paid anyone to set up a dish.
Its called dishalign.
All you need to know is what satellite you are connecting to. Also in the menu in the receiver.
Rough crowd over on a Facebook group. Everybody got tired of a "LS in my A body" dude and the site owner changed the title and rules and shoved the guy out the door. Bye Bye! 
Doing just a little research, I can sure see why the LS in anything is the swap Da Jour! Small potent power plant. AND they are every where! Pick a parts are full of them in trucks!Rough crowd over on a Facebook group. Everybody got tired of a "LS in my A body" dude and the site owner Changed the title and rules and shoved the guy out the door. Bye Bye!
zkx14
Duster De-ruster
Pic file named 'hookups' A little different than what @Ben Drinkin might have posted.
yep
Put it around your other shoulder today an it will bring everything back in alignment.
After they did our roof, ours barely worked. I tried to set it up and got it to work much better, but would drop out too easy on a storm etc. Brought the Dish guy out and he fine tuned it..
Good Morning
zkx14
Duster De-ruster
So did they run him off for using bowtie parts or was he being a schmuck? lolRough crowd over on a Facebook group. Everybody got tired of a "LS in my A body" dude and the site owner changed the title and rules and shoved the guy out the door. Bye Bye!
This post is like a Bill in congress, full of riders looking for A like!Pic file named 'hookups' A little different than what @Ben Drinkin might have posted.
yep
Put it around your other shoulder today an it will bring everything back in alignment.
After they did our roof, ours barely worked. I tried to set it up and got it to work much better, but would drop out too easy on a storm etc. Brought the Dish guy out and he fine tuned it..
Good Morning
Just guessing, but I bet he was rubbing it in that his LS A body could kick there cars asses!
zkx14
Duster De-ruster
If I didn't combine responses with multiquote as I frequently do, I would be 1000s higher on likes. And that's just from Karl. LOLThis post is like a Bill in congress, full of riders looking for A like!
Both.. The two kinda go hand in hand.
Ya and lots of "Mopar is junk" stuff.
Unconventional
Well-Known Member
It's Willys Wednesday
Well I got that CRV outta here yesterday...But it needed more parts, than the alternator...Water pump, Serp belt, tensioner. Lot of labor time...Good paying job.. Now I have a 2014 Hyundai for plugs, trans fluid change, Coolant flush, PM stuff, few lights...Want to try to cut grass today, if the Sun ever comes out....
Then.... Tomorrow I have the Volvo from Hell......Has 367K on it.........
Unconventional
Well-Known Member
Stickin' to the same vehicle that long
Got manifold out in 2 hours. Not bad. Gruelling with a pinched nerve in my neck. Only way to get nuts off is a long chisel bit on my air hammer. Ball joint press. $865 after taxes. That thing looks indestructable. But i do know a guy that could wreck an anvil.
Finish my coffee and get this job done.
Finish my coffee and get this job done.
Unconventional
Well-Known Member
What was that home remedy weed killer I saw a few days ago? Gallon of white vinegar and a cup of salt?
epsom salt, dawn dishwashing liquid.
-
Similar threads
