Stop in for a cup of coffee

[ZMan67S]

Need to put a little rubber grommet on the top of the hood pop up spring. Seems the top of the spring is scuffing the bottom of the hood where they meet when I put the hood down. Never had this problem before.
I can get something to leave on and then pop off when I'm showing the car. Seen others do it just never paid attention to what they did.
Looks like a trip to the hardware store.

 

[dartnabout]

I have an antennae on the roof and get 26 channels. No cable or dish for me

 

[dartnabout]

Gotta go

 

[halifaxhops]

My antenna gets 11 channels and then I have fire TV stick. Gets a ton of channels through prime. Dam cable and dish were ridiculous.

 

[toolmanmike]

Need to put a little rubber grommet on the top of the hood pop up spring. Seems the top of the spring is scuffing the bottom of the hood where they meet when I put the hood down. Never had this problem before.
I can get something to leave on and then pop off when I'm showing the car. Seen others do it just never paid attention to what they did.
Looks like a trip to the hardware store.

A rubber crutch pad might help. Yep, hardware store should have what you need. Menards has a bunch of that kind of stuff as well.

 

[krazykuda]

Need to put a little rubber grommet on the top of the hood pop up spring. Seems the top of the spring is scuffing the bottom of the hood where they meet when I put the hood down. Never had this problem before.
I can get something to leave on and then pop off when I'm showing the car. Seen others do it just never paid attention to what they did.
Looks like a trip to the hardware store.

Why not try a vacuum cap on the end of the spring...

Either the vinyl or rubber type.... (That's what she said.... )

 

[halifaxhops]

Funny you mentioned rotor my antenna is on a rotor and it is not working right just picked up a omni directional antenna plan on putting it up this weekend.

 

[krazykuda]

Gotta go

It's down the hall, second door on the left....

 

[ZMan67S]

A rubber crutch pad might help. Yep, hardware store should have what you need. Menards has a bunch of that kind of stuff as well.

That might be it. Trim it down to cover the top. Thanks Mike!!

 

[krazykuda]

A rubber crutch pad might help. Yep, hardware store should have what you need. Menards has a bunch of that kind of stuff as well.

That's a crutch....

 

[halifaxhops]

I have seen people use the same rubber off of one of the hood alignment supports up on the cowl that can be adjusted. Forgot the name of them.

 

[Bills65Dart]

Good morning everybody, and the others too.

Bill

 

[krazykuda]

Did you hear about the two antennae that got married???

The ceremony sucked, but the reception was awesome....

 

[krazykuda]

I have seen people use the same rubber off of one of the hood alignment supports up on the cowl that can be adjusted. Forgot the name of them.

Those are called 'rubbeer thingy"....

 

[krazykuda]

Oh who was the genius that was braggin on it bein 48* somwhere? It's 74 here now. Gonna be like 90. Yall just shut up all that braggin. lol

We're going to get a high of 64° today... Nice and cool....

 

[halifaxhops]

This just the rubber

 

[krazykuda]

Were you guys able to duplicate the factory insulation around the crimp for that wire?
View attachment 1715403770

No...

 

[ZMan67S]

Why not try a vacuum cap on the end of the spring...

Either the vinyl or rubber type.... (That's what she said.... )

I thought about checking the plumbing section sure I'll find something.

 

[ZMan67S]

I have seen people use the same rubber off of one of the hood alignment supports up on the cowl that can be adjusted. Forgot the name of them.

And I think I have a couple of those somewhere in the garage.

 

[krazykuda]

This just the rubber
View attachment 1715403781

That's what she said....

 

[ZMan67S]

@toolmanmike
Mike did you ever get one of those battery topper plates. I saw you in the thread I read this morning.
My resto battery is fading again. I'm not buying another one, time for plan B.

 

[toolmanmike]

@toolmanmike
Mike did you ever get one of those battery topper plates. I saw you in the thread I read this morning.
My resto battery is fading again. I'm not buying another one, time for plan B.

No never did.

 

[toolmanmike]

@toolmanmike
Mike did you ever get one of those battery topper plates. I saw you in the thread I read this morning.
My resto battery is fading again. I'm not buying another one, time for plan B.

Mopar Battery "Look" on the Cheap

 

[ZMan67S]

No never did.

So you don't seem to have trouble with yours. Do you keep it on a trickle charger??

 

[krazykuda]

@toolmanmike
Mike did you ever get one of those battery topper plates. I saw you in the thread I read this morning.
My resto battery is fading again. I'm not buying another one, time for plan B.

Isn't plan B the morning after pill????

It really should be plan A...