Stop in for a cup of coffee

-
That will be such a fun car. It should give Keith's a run!
Hope to find out this spring, even though I have tall gears with a shure grip automatic, I am hoping my light transmission, 8 1/4 rear end will net a good 1/4 mile pass. But as fore 1/8 mile that four speed and his gears would give me to many feet to catch up to, but you do know its the driver
 

70 year old horns. Still work!! Im keepin em. Not even cleaning them. Just as proof how well things were made long ago.
Even the relay works. It will put up with 12 volts as amp draw is lower. And its intermittent.
 
70 year old horns. Still work!! Im keepin em. Not even cleaning them. Just as proof how well things were made long ago.
Even the relay works. It will put up with 12 volts as amp draw is lower. And its intermittent.

Yeah, it's better than new....it's old!
 
Click your name at the top right, click Gold membership, it’ll give you the expiration date there
I see it now...You have to scroll down to the second part 'purchase upgrades' and its in the top right of that box. I think that is relatively new that you can pay ahead. Like in the last couple years anyway. A while back I wanted to renew early and don't think there was any way to do it.

Good Morning
 
...

let it roll.jpg
 
Gonna transfer the GTS emblems from the crusty door panels onto the new ones today. Maybe get em installed, maybe not...Feels like a BEER Day........
 
Go to put glass channel in driver side door, 1 long section of channel is missing. And its welded in. Hope my older donor door is the same. Its a vent window type not a 1 piece like mine. To make it isnt impossible, just a whole lot of time.
 
Gonna transfer the GTS emblems from the crusty door panels onto the new ones today. Maybe get em installed, maybe not...Feels like a BEER Day........
I thought that yesterday but I haven't cracked one open yet. I have a liter of Witbier homebrew waiting. I might have to get into it this afternoon.
 
Trying to figure a way to attach them to the new panels ( after I clean them ). They were attached with rivets. Youse guys got any idears ? Maybe I can make slots in the new panels and attach them that way. Push em in and slide over ????
PXL_20201204_174003401.jpg
PXL_20201204_174017586.jpg
 
-
Back
Top Bottom