Stop in for a cup of coffee

[Tooljunkie]

Supposed to be a good couple nights for the northern lights.

View attachment 1715645366

I will see if i can get a couple photos.

 

[krazykuda]

I am going to strip the 904 that I have down to the case, attach GV to it and fab it up using that. Lighter weight to move around...Wish they made a plastic small block Mopar like they do Chevy...
Street Rod Parts » Engine » Plastic Block | Street Rod HQ
They do!!! Found one!!
4033 - Chrysler 318 Short Block
4030 - Chrysler 360 w/ W-2 Heads
Expensive BUT I think I am going to spring for one......Guarantee it will get used a lot If I pass it around to guys here as needed....

You can buy real 318 blocks cheaper than they want for the plastic one...

 

[MOPARMITCH]

You can buy real 318 blocks cheaper than they want for the plastic one...

He can always bring it to Carlisle and sell it......

 

[MOPARMITCH]

Just got back from the Grocery Rapists.....

 

[toolmanmike]

Just got back from the Grocery Rapists.....

The farmers and the retailers don't make much. (percentage wise) The producer and wholesalers do.

 

[krazykuda]

Just got back from the Grocery Rapists.....

I like rape....

 

[Tooljunkie]

Speaking of photos,to quote my buddy’s father, in a John Wayne sort of voice-
“Good Enough”
Ol Henry was a big man, looked very much like John Wayne too.
Awesome carpenter..

 

[Tooljunkie]

I have to walk away from it, let the primer harden up.

 

[missing linc]

Looking pretty good

 

[zkx14]

anybody need help with computer problems?

 

[Mopar Tim]

You can buy real 318 blocks cheaper than they want for the plastic one...

Hmm cast iron. Plastic. Which is easier to get in and out? Delima....

 

[Tooljunkie]

Meanwhile, back at the workbench...

 

[Mopar Tim]

Meanwhile, back at the workbench...View attachment 1715645478

Hi tech

 

[Tooljunkie]

1/2 done!

 

[Mopar Tim]

Getting there

 

[MOPARMITCH]

1/2 done!View attachment 1715645486

Those are permanent aren't they ? You welded them on, right ? I LIKE it......

 

[Mopar Tim]

Getting there

View attachment 1715645498

The doors are the hardest part to make....And drawers...

 

[krazykuda]

Hmm cast iron. Plastic. Which is easier to get in and out? Delima....

That's what she said....

 

[Tooljunkie]

Those are permanent aren't they ? You welded them on, right ? I LIKE it......

3/8 square sticking out of door, grabbed some old sockets, machined em down so just square is left and welded to nut, welded nut to wrench. Cotter pin holds em on.

 

[toolmanmike]

I got both cars out and cruised a little with each one. I put a little Sea Foam in the tanks and got it worked in and also put some Bounce sheets in the cabin and trunk. Seems to help.

 

[Tooljunkie]

Looks like no aurora borealis tonight. Clouds are moving in.

 

[Tooljunkie]

Black it is...

 

[toolmanmike]

Black it is...View attachment 1715645520

Looks good!!!!

 

[Unconventional]

+

Door handle/armrest?

 

[Unconventional]

Window crank?