They wont even come close!
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Unconventional
Well-Known Member
I considered adding a Hoppythong to that thread last night
Had to go back about 5 days to find Hoppy and then LIGHTBULB Ah man ... Don't do that .. You be cuttin' in on Hoppy's action 
I considered adding a Hoppythong to that thread last night
I considered adding a Hoppythong to that thread last night
See I have magical powers and like superman I change into a super thong!
Good morning everyone. PT today then dropping the daily off for a brake job. Sucks being off but having to pay to have the work done. Oh well. Back to exercises.
Unconventional
Well-Known Member
Worked a interesting deal yesterday from a tempest find. This will be interesting I bareley know what I bought for $200. You do have to roll the dice once in a while.
I just use a homeless tent now!Without the aid of a phone booth no doubt. Good luck findin' one of them
Unconventional
Well-Known Member
Might find 4 boxes in there that cover the entire purchase
Looks like old stuff according to the boxes. (pre 1950)
I saw at east that before I threw a offerMight find 4 boxes in there that cover the entire purchase
Easily I checked before I threw a offer
ots of 30;s and 40's stuff.
Unconventional
Well-Known Member
Doing one for this beast.
This is for a '68 Barracuda
This is for a '68 Barracuda
- 225 long-rod slant-6 that should be about 225HP(still at the machinist shop). Intake is a Holley 390CFM 8007 4150 on top of an Offy intake + wiesco full-floater pistons @ 3.445" bore + lightweight valvetrain + oversized valves (1.75 & 1.45), 9.5 compression, double-roller timing set, and cammed by an OCG #346 (234/228 duration, 476/479 lift).
- Ignition is electronic, with the HiRev-7500 box from Rick Ehrenberg (Mopar Action mag) + Pertronix FlameThrower #40511 coil.
- Exhaust is an old-school Mopar 6:1 long-tube header feeding a single 2.25 pipe and Flowmaster big-block Delta 70 muffler.
- Trans is a 904 with HD steels & frictions + TransGo FT1 kit + 2,800 stall street-converter by Andre (Edge Racing Converters).
- Rear is an 8.25 with (currently) 2.45 changing up to 3.21 late in the fall perhaps. Running 24" tall tires (approx.).
- I'm not at all a racer - but I do like torque. This is a cruiser that is on New England's hilly/twisty backroads (40-50 MPH) about 60% of the time and highway (65-70 MPH) the rest. I also live in a city, so traffic is common until I get past the city limits.
Not yet. Would not doubt some one did that.Didn't find a '34 Plymouth coupe with a Hemi hidin' in there didja?
Timmy!!!! Tomorrow I don't have to look at you any more!!!!!
Unconventional
Well-Known Member
Low 80s for a few days here, then it looks like we fast forward to June Gloom 
Unconventional
Well-Known Member
I shoulda taught the brat to drive my GMC, it had a 5 spd. She be would the exception to the new rule .
Ahh, what the hell, she got a '72 Swinger when all her buddies were drivin' ricers
.Ahh, what the hell, she got a '72 Swinger when all her buddies were drivin' ricers
My kids learned on a stick and passed the road test first shot!
Unconventional
Well-Known Member
3 outa 5 of my dailys have been stick cars. 2 of them just so the spousal unit couldn't drive them
My kids have a seriously hard time with cursive. Mostly from birthday cards!
Oh crap sounds ike mine! Wonder what will happen when the Cuda is done with a push button shifter! I am sure I wil get a call the car will not start!3 outa 5 of my dailys have been stick cars. 2 of them just so the spousal unit couldn't drive them
My buddy has a home remodeling business. I gave him a list of what I needed done. He sent a couple guys over to take care of it. The one guy pulls out the list and is reviewing it with me. He stops and says "what does that say, you wrote in cursive and I'm having problems reading it"...haha!! And no it wasn't sloppy writing, I'll always remember the ruler across the knuckles for sloppy writing.
Can you imagine kids in grade school today, receiving the same corporal punishment we got when we were in school?? Holly crap there'd be an uproar...at least from the 50 and younger crowd. Maybe a little discipline might due the next generation some good, that is when they finally get back in school.
-
Similar threads
