Stop in for a cup of coffee

[Mopar Tim]

How heavy is HEAVY I guess. Weight limits, distribution and tongue weight if that matters

Not that heavy. I haul with a one ton Duelly. so weight is not to big an issue...

 

[WV64Signet]

Trailer is a tilt bed.....I don't want to do anything to limit it's use.....BUT I could use the extra hauling capacity...

Any way to set it up for mount/dismount? Sleeves and pins?

 

[Unconventional]

Trailer is a tilt bed.....I don't want to do anything to limit it's use.....BUT I could use the extra hauling capacity...

Could make it a little dicey loading or unloading in the shop

 

[Mopar Tim]

Trailer is a tilt bed.....I don't want to do anything to limit it's use.....BUT I could use the extra hauling capacity...

I could bolt it on... and off....

 

[Unconventional]

@halifaxhops

Mopar Mallory SB Unilite Distributor - auto parts - by owner -...

 

[FISHYPETE]

Maybe build a rack for the pickup?

 

[Mopar Tim]

Maybe build a rack for the pickup?

That is a possibility as well. BUT I use my truck to haul my 5th wheel. So it would have to be removed more often then if it was on the trailer...

 

[71340Duster]

The sad news is that number 14 probably won’t happen, mama is having emergency surgery now and this may end their chances for a second baby

Sorry to hear that, prayers for the both of them.

 

[dukeboy440]

 

[dukeboy440]

The sad news is that number 14 probably won’t happen, mama is having emergency surgery now and this may end their chances for a second baby

Prayers

 

[Mopar Tim]

These are the racks I scored

 

[Mopar Tim]

They are 102 wide. Same as the trailer width. At the outside of the wheels..

 

[Mopar Tim]

I'll probably leave it as is...

 

[Mopar Tim]

This

 

[zkx14]

I'll take some

Getting any snow up there?

 

[Tooljunkie]

PUT THE BLADE ON Backwards
View attachment 1715886854

I have a recip blade,3 TPI, should work! I use it for railroad ties mostly.

 

[toolmanmike]

I have a recip blade,3 TPI, should work! I use it for railroad ties mostly.

It's the stroke that makes a big difference. (Que Karl) The ful sized saws-all's have a fairly long stroke and don't work too bad on wood cutting and the like. Smaller cordless recip saws have a short stroke and regardless of the blade are not animals in the cutting department. Air saws are like cutting with a dull butter knife.

 

[dukeboy440]

It's the stroke that makes a big difference. (Que Karl) The ful sized saws-all's have a fairly long stroke and don't work too bad on wood cutting and the like. Smaller cordless recip saws have a short stroke and regardless of the blade are not animals in the cutting department. Air saws are like cutting with a dull butter knife.

So Menards had a small electric detailing saw with blades for plastics and plexiglass for 30 bucks. Figure I’ll give it a shot.

 

[71GSSDemon]

Good morning everyone. Had a 2 hr weapons class today. Took my boy out for a big breakfast first. Thinking a nap in my future...

 

[71GSSDemon]

And my boy went with me while I tried Pha short rib soup yesterday. Delicious

 

[Tooljunkie]

A nap. Great idea!

 

[zkx14]

I have a recip blade,3 TPI, should work! I use it for railroad ties mostly.

That would beat the snot out of 1/8” plexi.

 

[dukeboy440]

So I got creative. Took a scrap piece of paneling I’d laying around transfered my trace to it, sandwiched the plexiglass between the paneling and boom, worked great. Pics to follow

 

[71GSSDemon]

So, I pulled the Demon outside to hear the new exhaust, see the new stance, and the look with the new front wheels. I like! Can't wait for the hood and Spring!

 

[WV64Signet]

Had to run down into town. Wind is making a mess of the roads up on the ridge (this is the state highway). Much better down in the valley.