Stop in for a cup of coffee

[Mattax]

There's the interior...

Smidge of debris in there, Eh?

View attachment 1716297176

View attachment 1716297177

Intereseting color of that filter. Sender, tube and float look good.
Got a place to clean the tank?

Damn, making me hungry.

Was gonna agree and then thought that might come across weird and creepy!

Would there have originally been a mat or some sort of anti vibration stuff up there?

On a 67 yes.
On your Canadian early IDK
Picture in the books?

 

[Mattax]

Well ****! Only desert I get is Ice cream and Oreo's.

I dont even have any interest in buying desert.
A beer or some herbal tea after dinner - or both - spaced out of course

 

[WV64Signet]

Intereseting color of that filter. Sender, tube and float look good.
Got a place to clean the tank?

What would you clean it with Matt?

 

[zkx14]

Yes, like roofing paper, tar paper...

Heavy weight stuff though…

 

[Frodee]

I dont even have any interest in buying desert.
A beer or some herbal tea after dinner - or both - spaced out of course

I'm not a big fan of sweets, mostly just an ice cream now and then.

 

[WV64Signet]

This going too deep in the tank?

 

[abdywgn]

last night's "5 can" dinner

 

[Mattax]

You living in a cave?

Fuel Sending Units and A-Body Fuel Tank Map

There are two Main Reasons that Aftermarket fuel sending units do not give accurate fuel level readings. The first and most important is that the wire-wound variable resistance board on the stock sending units are shaped and wound for the tank that it was intended to be used in. Therefore the...

www.forabodiesonly.com

Fuel tank sending unit

I thought I would share an experience I have had. Searching the forum endlessly for what brand or where I can purchase a sending unit that will make my fuel gauge read correctly, I stumbled upon a posting from Slant Six Dan where he linked to Plum Krazy Garage in Australia because they not only...

www.forabodiesonly.com

yet another fuel gauge thread - reads full all the time

1970 Dart with a standard (not rallye) dash So I installed a new fuel sending unit in my tank. I got it set the way I wanted it by bending the arm and it worked fine for a couple months, though it wasn't driven much, and now it reads full all the time (like on the F). The car has a new style...

www.forabodiesonly.com

 

[toolmanmike]

last night's "5 can" dinner

View attachment 1716297262

Dang, that looks good too.

 

[Mattax]

What would you clean it with Matt?

The filter?
Buy a new one.
Now something has cropped up since I last had to buy one. Apparently there are cylindrical ones and others that have flat end or somehting like that. I don't know why there are different versions. Find one like the one that's on there. Why experiment/

As far as the tank, I've not had to go that far. My friend brought that thanls from his '60 Sprite and a later 60s SAAB to a place in Yeadon or Upper Darby. One needed patching too. They're not there now - so I'm no help at all there.

Looks like Dana did some testing

EVAPO-RUST AND A FUEL SENDING UNIT

Hi Folks Electrical or Fuel & Air? Here goes........ :) Does anyone have any personal experience soaking a complete fuel sending unit in Evapo-rust? I know the metal can handle it, but what about the rheostat winding? ALSO............Does anyone have a link to a pick-up sock for the...

www.forabodiesonly.com

 

[toolmanmike]

View attachment 1716297263

You living in a cave?

Fuel Sending Units and A-Body Fuel Tank Map

There are two Main Reasons that Aftermarket fuel sending units do not give accurate fuel level readings. The first and most important is that the wire-wound variable resistance board on the stock sending units are shaped and wound for the tank that it was intended to be used in. Therefore the...

www.forabodiesonly.com

Fuel tank sending unit

I thought I would share an experience I have had. Searching the forum endlessly for what brand or where I can purchase a sending unit that will make my fuel gauge read correctly, I stumbled upon a posting from Slant Six Dan where he linked to Plum Krazy Garage in Australia because they not only...

www.forabodiesonly.com

yet another fuel gauge thread - reads full all the time

1970 Dart with a standard (not rallye) dash So I installed a new fuel sending unit in my tank. I got it set the way I wanted it by bending the arm and it worked fine for a couple months, though it wasn't driven much, and now it reads full all the time (like on the F). The car has a new style...

www.forabodiesonly.com

Don't forget the "who rebuilds fuel tank senders" and the "Meter Match" thread.They are stickys in the fuel and carb forum.

 

[abdywgn]

here's the recipe:
pineapple juice was drained and had that while "melding" the ingredients
and the black beans were rinsed and tossed till clean

 

[toolmanmike]

here's the recipe:
pineapple juice was drained and had that while "melding" the ingredients
and the black beans were rinsed and tossed till clean

View attachment 1716297267

Sounds good. Love all the ingredients!

 

[abdywgn]

I thought about having it for breakfast tomorrow with a few eggs...but, maybe not such a good idea when going to church after eating. Well, there's always lunch!

 

[toolmanmike]

Made a big ol' margarita. Fancy glasses not needed. Start with a BOG
(big ol glass), 1/2 glass of crushed ice from my new frig. (which isn't officially installed yet), 2 shots of good Tequila, amd top it off with Jose Quervo mix.

 

[WV64Signet]

On a 67 yes.
On your Canadian early IDK
Picture in the books

Spodda-bee

 

[Tooljunkie]

Got the new, correct lens installed on the 37. Residual valve next. Should be done with it monday or tuesday.

 

[toolmanmike]

Fail! New oven. Warmed it up, put the pizza in, set the timer for 12 min. Don't need to read no damn instructions! The timer wasn't counting down. Now I have no idea how long the pizza has been in. I set it to 12 hours and not 12 min. (like the microwave) 12.00.

 

[Frodee]

Got the new, correct lens installed on the 37. Residual valve next. Should be done with it monday or tuesday.

Have a good party tomorrow Frank. Pictures please.....

 

[Frodee]

Fail! New oven. Warmed it up, put the pizza in, set the timer for 12 min. Don't need to read no damn instructions! The timer wasn't counting down. Now I have no idea how long the pizza has been in. I set it to 12 hours and not 12 min. (like the microwave) 12.00.

I hate trying to learn new stuff. I can burn anything without any help from a damn computer. Smoke alarm is the best timer.

 

[WV64Signet]

Fail! New oven. Warmed it up, put the pizza in, set the timer for 12 min. Don't need to read no damn instructions! The timer wasn't counting down. Now I have no idea how long the pizza has been in. I set it to 12 hours and not 12 min. (like the microwave) 12.00.

You're that guy that incinerates the microwave popcorn filling the hall with smoke and causing the hotel to be evacuated, aren't you?

 

[Frodee]

You're that guy that incinerates the microwave popcorn filling the hall with smoke and causing the hotel to be evacuated, aren't you?

 

[WV64Signet]

I'm puzzled why Classic Industries states that the sending unit I bought is correct. It's not even close

 

[toolmanmike]

I'm puzzled why Classic Industries states that the sending unit I bought is correct. It's not even close

View attachment 1716297282

View attachment 1716297284

Well, it works but it isn't a duplicate of original. THe repops are far from accurate. Some are close.

 

[Mopar Tim]

This going too deep in the tank?

View attachment 1716297260

View attachment 1716297264

View attachment 1716297265

If you do not use the old one I will buy it if I can...