Icetech
Well-Known Member
I have been looking for one for a year.. put it on marketplace for $250... it will sell..
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Icetech
Well-Known Member
If you have a bore scope ($20 on amazon. worth it) and stick it in the dist hole you get a look at the valley.. they came with the roller lifter holes to mount the spider but not a roller cam usually
tried a different mex place for lunch ...if you don't here from me for a couple of day you will know it didn't work out
Icetech
Well-Known Member
evaporust? yes.. but i have my own mixture... evaporust is $20 a gallon... i can do like 30 gallons for $20 or more.... and it works better actually cause it lasts much longer, not just 2 uses
I saved it in my favorites...............
Rust removal, better than evaporust and 10x cheaper..
soo.. so in doing my car which was a michigan car i have dealt with a lot of rust and spent way too much money on evaporust that i finally went online and looked and found this guys video and made his mix and it worked better than evaporust and lasts longer so far. Sadly i'm down to only a few...
www.forbbodiesonly.com
Icetech
Well-Known Member
This stuff is really amazing..I saved it in my favorites...............
Rust removal, better than evaporust and 10x cheaper..
soo.. so in doing my car which was a michigan car i have dealt with a lot of rust and spent way too much money on evaporust that i finally went online and looked and found this guys video and made his mix and it worked better than evaporust and lasts longer so far. Sadly i'm down to only a few...
BTW.. you get your car done?
No the guy had an issue with his water heater flooding, hopefully tomorrow. He is helping me out so whenever is convenient for him............... I ordered the new MC stuff from Mancini so I'll wait on that. Car will be apart for a week or so I guess
I did find that missing bolt, that was a win!
Icetech
Well-Known Member
ahhh sorry.. been a long day i thought today was tomorrow
So you gonna have to get a new MC everytime you lash that thing? or just the rod?
No I ordered the right one from Mancini, that I should have went with originally. I will not go through this mess again................ It's all good live and learn and make it better.ahhh sorry.. been a long day i thought today was tomorrow
Icetech
Well-Known Member
Now i need to figure what i wanna do for my motor... 360 with better rods/pistons... the cranks can handle way over 500hp which i won't even hit prolly.. Or.. full forged 408 kit.. would probably be bullet proof... difference is $1500ish... or $3000ish... in parts
Icetech
Well-Known Member
is that a offset mounting pad? or the 2 bolt one?
Since I got **** apart, I also ordered new ViKing shocks for the front too, now they will be on all 4 corners...............
Icetech
Well-Known Member
nice.. i'm a monroe guy! $25 eachSince I got **** apart, I also ordered new ViKing shocks for the front too, now they will be on all 4 corners...............
Both actually, offset and 2 bolt
Icetech
Well-Known Member
awesome.. i went to the 2 bolt, i assume it's the later aluminum one.. it's soo niceBoth actually, offset and 2 bolt
Don't touch the sloppy seconds fred.Crap I forgot about dinner.
Left over surprise, I guess.
This big jalopy that was on there.........................
Get Outa Here!
Get Outa Here!
Icetech
Well-Known Member
Man that's soo tight.... i was working on my engine today... leaned too far and fell right through between the header and fenderwall... Not a scratch on me.... sooo much room
Man that's soo tight.... i was working on my engine today... leaned too far and fell right through between the header and fenderwall... Not a scratch on me.... sooo much room
I wish, it took me 8 hours to find a bolt I dropped.........................
Icetech
Well-Known Member
8 hours? where was it? and i'm glad you found it....
I wish, it took me 8 hours to find a bolt I dropped.........................
View attachment 1716391890
still looking for that 10mm socketMan that's soo tight.... i was working on my engine today... leaned too far and fell right through between the header and fenderwall... Not a scratch on me.... sooo much room
Dropped into the frame rail............I searched everywhere numerous times. I didn't need it to show up somewhere down the road and hurt something
-
Similar threads
