Stop in for a cup of coffee

[Frodee]

Just finished molding up another chin spoiler and now waiting for it to dry.

 

[Frodee]

Remembering the old days when we could order Centerlines in pieces and put together just about whatever sizes we wanted for the race buggies

I'm not sure if they even make centerlines anymore.

 

[Unconventional]

I'm not sure if they even make centerlines anymore.

The Centerline look is still out there, but unsure where they come from now.

 

[Unconventional]

Chances are, like everybody else they dropped the 5x4" bolt circle from their catalogs

 

[Frodee]

The Centerline look is still out there, but unsure where they come from now.

Mine have some aging spots on them and would like to get new rims but at 10 feet away they look fine.

 

[Unconventional]

Somebunny probly makes a product to remove them spots.

 

[Frodee]

Somebunny probly makes a product to remove them spots.

I'm not sure Alex but I should check and see.

 

[Scott_ 69HemiDart]

Black rims look good Scott. Your car you do what you like. My son runs black rims on his duster it looks good. I was thinking of switching to black myself.

Black with aluminum slots on the front?

 

[Icetech]

Black with aluminum slots on the front?

I like black with slots.. but those white letters need to be on the inside

 

[Scott_ 69HemiDart]

I like black with slots.. but those white letters need to be on the inside

agree, just discussing that with my wife. The plan for tomorrow is white letters switched to inside, and another set of 275 60 16 for the aluminum slots and pull them off the Hoosiers that are too tall.

 

[Icetech]

agree, just discussing that with my wife. The plan for tomorrow is white letters switched to inside, and another set of 275 60 16 for the aluminum slots and pull them off the Hoosiers that are too tall.

what gear does that car have? i would go as tall as you can fit for rears to bring the gear down.. i went 30"

 

[Scott_ 69HemiDart]

what gear does that car have? i would go as tall as you can fit for rears to bring the gear down.. i went 30"

I agree but the problem with the 295 is too tall with the quarter…..

 

[Icetech]

I agree but the problem with the 295 is too tall with the fender…..

Quarter.. and... didn't know... don't have a dart....30s are way tight on mine

 

[Scott_ 69HemiDart]

Added an old tv to the shop. Been sitting in the basement for 5 years. 2016 55” perfect for YouTube Netflix etc.

 

[Icetech]

Is that the cleanest bobcat ever sitting there?

 

[Scott_ 69HemiDart]

Quarter.. and... didn't know... don't have a dart....30s are way tight on mine

Outside lip of the quarter will rub and cut the tire. No room

 

[Scott_ 69HemiDart]

Is that the cleanest bobcat ever sitting there?

I wash it and take care of it, cost too much money

 

[Icetech]

Outside lip of the quarter will rub and cut the tire. No room

yeah.. i had to cut my lips back a bit.... i made..i can cut them

 

[Icetech]

I wash it and take care of it, cost too much money

that's good to do..i have never seen one that clean Usually rust/paint missing and left outside

 

[Scott_ 69HemiDart]

yeah.. i had to cut my lips back a bit.... i made..i can cut them

FIL glassed them in to add big slicks. Nothing to cut unfortunately

 

[Scott_ 69HemiDart]

that's good to do..i have never seen one that clean Usually rust/paint missing and left outside

Bought it new in 2022

 

[WV64Signet]

Chances are, like everybody else they dropped the 5x4" bolt circle from their catalogs

15" SBP steelies are gone. You can find Rallies new... I grabbed 15" Cragar 5 X 4s but those are going to be gone soon as well.

Tough to find certain tire sizes as well.

 

[Icetech]

15" SBP steelies are gone. You can find Rallies new... I grabbed 15" Cragar 5 X 4s but those are going to be gone soon as well.

Tough to find certain tire sizes as well.

Market place always has 4" rims.. usually cheap too

 

[Frodee]

 

[fatoldguy]

Black with aluminum slots on the front?

Black all around .