Stop in for a cup of coffee

[dartnabout]

It still ran great. No issue with power. Could hear a little as I got moving, pretty obvious at 40mph, getting a bit loud by 60. But not 'terrible' They ran it up on a lift in the shop and it was SCREAMING. Then the service manager went to lower him and I thought he was going to dump it. Right side dropped a few inches and left didn't budge. Did that 3 or 4 times before it would drop the left side. He's like !!! Couldn't hear him, but after first one pretty sure he was asking if it ever did that before and by the look he gave, guessing he was told yes. Pretty sure someone was going to be getting an *** chewing for not reporting it.

So is it under warranty?

 

[FISHYPETE]

Mine is a 59

Hey, it's a 57. What year is your's @FISHYPETE?

 

[zkx14]

So is it under warranty?

Yes. As far as I know, I shouldn’t have to pay a dime. They didn’t even ask me what I wanted to do. Just gave me a car to drive…

 

[WV64Signet]

Yes. As far as I know, I shouldn’t have to pay a dime. They didn’t even ask me what I wanted to do. Just gave me a car to drive…

Is it a common failure for that model?

 

[zkx14]

Is it a common failure for that model?

Not that I knew of, but haven't researched it

 

[WV64Signet]

Purchased a week apart. Same store

$5.09 now $6.99

 

[WV64Signet]

16K views · 523 reactions | Check out this rear engine 1964 Dodge D200 at back to the 50's Car Show | Big Boy Carz

Resto-mod

Rear engine is interesting. Wonder what the rest of the drive looks like

 

[WV64Signet]

It was a video with Stranglehold as background music. Protected content so I could only grab the screenshot

 

[Unconventional]

Peewee Herman style.

View attachment 1716420882

Similar to the electric bike riders 'round here They'e entitled

 

[toolmanmike]

Is it a common failure for that model?

Auto or manual?

 

[71340Duster]

16K views · 523 reactions | Check out this rear engine 1964 Dodge D200 at back to the 50's Car Show | Big Boy Carz

Resto-mod

Rear engine is interesting. Wonder what the rest of the drive looks like

View attachment 1716420902

Short and stout. Pretty cool!

 

[WV64Signet]

Auto or manual?

@zkx14

?

 

[fatoldguy]

View attachment 1716420880

 

[71340Duster]

 

[zkx14]

@zkx14

?

Auto.

 

[dukeboy440]

Purchased a week apart. Same store

$5.09 now $6.99

View attachment 1716420898

Cost of everything is skyrocketing. Again. I bet the people that’s making those is making maybe 1.00 per pack at the most right now

I looked into making and selling our own cheese , I’d have to sell at 10-12 bucks a pound just cover expenses depending on cheese types. Mostly due to government permitting and fees. The higher the volume one makes though, that price of production goes down

 

[71GSSDemon]

It is cold at the beach. 20mph wind off the Lake.

 

[Sublime one]

Purchased a week apart. Same store

$5.09 now $6.99

View attachment 1716420898

That is good cheese right there. Pair that with a heavy red and you got some yummy!

 

[Sublime one]

Purchased a week apart. Same store

$5.09 now $6.99

View attachment 1716420898

As an aside we love manchigo (sp?) goat cheese. It is right at twenty bucks a pound. We have not had any in awhile!

 

[WV64Signet]

As an aside we love manchigo (sp?) goat cheese. It is right at twenty bucks a pound. We have not had any in awhile!

That was my go-to during reenactments
It held up well in my haversack, wrapped in a cloth, even at 90 plus degrees all weekend

 

[WV64Signet]

That is good cheese right there. Pair that with a heavy red and you got some yummy!

I only go Malbec or Merlot...although a very dry Reisling can get my attention

 

[WV64Signet]

It is cold at the beach. 20mph wind off the Lake.

View attachment 1716420953

Could use the air movement down here. Too still, and 89°

 

[71340Duster]

Not a good start for projects in the shop. First was the "repaired" Pioneer integrated amp, no trouble found by repair tech, it's going back to him with pics of the overload tripping light on. Only good news that resulted from that was I hooked up to my Harman Kardon AVR80, also vintage and it's playing fine. Then I pulled grill apart to put new lens/lamps in and they don't clear the holes in the buckets, 3 prong sits higher on OEM, more centered on Kioto's so is hitting bottom of bucket where connector goes through. I emailed Daniel Stern lighting, expect him to tell me how he didn't know this was an issue and a recommendation to notch it which I can do fairly easily it's just the point of said "plug and play".

 

[FISHYPETE]

Hey, that’s exactly like mine….except for roll cage ,big tires and tail lights

View attachment 1716420904

It was a video with Stranglehold as background music. Protected content so I could only grab the screenshot

 

[Tooljunkie]

Ever have a day when you wish life would just end. Kinda one of those days for me. Old problems keep popping up in my head and I'd really like to be free of them.
Looks like time for a drink and might just take a walk around the block.

Yup.
Wish i could have made a few better choices in the past,especially the things that cause my current constant pain. Its manageable if i was to agree to take the nasty ****. Screw that. I will suffer before i become addicted to some crazy pain killer. It does cause some moments of depression,and people expect more than i can do. Thats what gets me the most. And i really hate asking for help.