Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Good Morning All! Happy Birthday Ray @halifaxhops!!!
Good Morning Mopar Men...and Women..
Happy Birthday indeed Mr Hoppster !!!
nuttyprof
Well-Known Member
Good morning
Morning
Good Morning Especially to our birthday boy
Just another day like many before.
But still a blessing to live to have another chance to see the sunrise, not everyone got to this morning.
Sparkey JR!
Getting the divorce finalized?Good morning!!!! hoping today might be one of the best days in 10+ yearslets wait and see
Icetech
Well-Known Member
Naw.. something i can't post bout here.. but if it's true i will dance with joy for the first time in my lifeGetting the divorce finalized?
Well...I started for the half a truck with the camper van and trailer in tow. When on the four lane a gowing moan continued and kept getting worse. At first I thought it was the tires on the road but as the road changed the roar kept getting louder. SO 2 hours out I turned around and limped home. Not sure if it is a wheel bearing or universal or something worse. Bad day
Icetech
Well-Known Member
Do you have a hot date tonight?Good morning!!!! hoping today might be one of the best days in 10+ years
Icetech
Well-Known Member
Naw.. i gave that **** up 20 years ago.. not worth dealing with
life is soo much easier
The roar is not as prominant on the back roads. Hoping if anything that it is a wheel bearingwell.. you made it home.... soo.. could be worse.. sorry though
Icetech
Well-Known Member
Modified my brake box last night so i will go less over center.. should help quite a bit.. then coated it in cast blast.. love that paint
P.S. and welding without a helmet always comes out soo nice "but it's just some quick tacks"
P.S. and welding without a helmet always comes out soo nice "but it's just some quick tacks"
What exactly did you do there Ice ?? Move the swing shaft up ??
The Indiana Fever gals won last night by 1. Must have been some game. They played LA, the game started at 9pm Central time and was on a couple obscure network I don't get. Heck, I was in bed by 9:15. LOL Wish I could have seen that one.
Icetech
Well-Known Member
Down and back a bit.. which gives me a bit more angle on the MC pushrod.. It's a mod from when i built my FFR Cobra... makes a massive difference in brake pressure on a manual system, when you go over center you lose a ton of pushing power.. I also changed my ratio from 6:1 to 7.25:1...
This is a cobra one... we would move the upper pivot then cut/bend and reweld the brake pedal to get the height back to normal which i will have to do once i get it in the car and see where it ends up
-
Similar threads
