KitCarlson
Well-Known Member
I live in Rockvale at the edge of Murfreesboro towards Franklin.
If I was looking for a switch, I would look for a new old original on ebay.
It is also possible to wire in a relay so the coil is fed from the IGN circuit, and main contact powered from battery. That solves the problem, and takes load off the switch. Similar can be done to serve other loads.
The bypass 67Dart273 suggests, including bulkhead repair helps too.
If I was looking for a switch, I would look for a new old original on ebay.
It is also possible to wire in a relay so the coil is fed from the IGN circuit, and main contact powered from battery. That solves the problem, and takes load off the switch. Similar can be done to serve other loads.
The bypass 67Dart273 suggests, including bulkhead repair helps too.