MR4V
Well-Known Member
Hi All
Has anyone mouted a Moroso Filtered Transmission cooler vertical?
I see it has inlet & return & the filter is not a floating one, my cocern is it not filling or cooling the trans.
My trans is a 727 reverse full manual with 4000 stall, i'm using -6 fittings with braided line & mounting it on the radiator support panel.
Also can someone tell me with is the outlet & return on the 727 box & if the pump will have enough pressure to do this.
http://www.summitracing.com/parts/mor-41200/overview/
Thanks
Has anyone mouted a Moroso Filtered Transmission cooler vertical?
I see it has inlet & return & the filter is not a floating one, my cocern is it not filling or cooling the trans.
My trans is a 727 reverse full manual with 4000 stall, i'm using -6 fittings with braided line & mounting it on the radiator support panel.
Also can someone tell me with is the outlet & return on the 727 box & if the pump will have enough pressure to do this.
http://www.summitracing.com/parts/mor-41200/overview/
Thanks