ramcharger
Dismember
Got a lifter tick on the RC's 360. I just pulled that valve cover and one valve was loose by 1 1/4 turns for the correct pre load. 1/2 a turn to zero and another 3/4 for preload and verified that the lifter did indeed bleed down that 3/4 turn so I know it's not a collapsed lifter. This was on the #6 Intake. I saw a big glob of the cam break-in grease by the pushrod hole but not by any others. I'm hoping that when I lubed the pushrod cup prior to start-up and adjustment the grease may have skewed my adjustment process. I hope.
Updates to come.
Updates to come.