abodyjoe
Well-Known Member
That 8 1/4 will bolt right in. You'll need the shock plates and u-bolts the driveshaft may or may not work. Grab the seats.A- Body buckets with the proper tracks bring some stupid money
Grab all the trim and tail lights. Its sometimes the little pieces that bring the most or trade for what you do need. If you do it for trade that may change your thinking on letting stuff lay that you dont need.
hell, I'd take the whole thing just give them what they would get for crushing it and pilfer the rest. I'm looking at at least 5 high dollar B-body parts in the pic!!!
whats the back story behind this???
yeah, no shiite! hey look at the front wheel. I guess Lambo uses the same bolt pattern as GM, that's a S-10 wheel on the front.whats the back story behind this???
I saw that too!!! Somewhere, someone has an S-10 with Lambo rims. LOL!:toothy10:yeah, no shiite! hey look at the front wheel. I guess Lambo uses the same bolt pattern as GM, that's a S-10 wheel on the front.
I wish I was closer. lol, If I had that Lambo, it'd get a 440!8)That Lambo bolt pattern is 5 x 120mm, the same as a Chevy 5 x 4.75" bolt pattern. The other side of the car has the same steel wheels. I don't know what the story is behind it, but the yard is full of muscle cars and performance European stuff. The only other super car out there is an 80's Ferrari; kind of a Magnum PI looking deal.
I got all 4 buckets and all the tracks. I also got the rear end started, but ran out of daylight, so I'll go back and grab it Saturday. He says he'll finish taking it out in the morning and set it aside for me, along with the wheels that are on it now. I pulled the steering wheels from both cars but didn't end up with any radios since they had both been replaced with crappy old cassette decks. I wasn't able to get any glass today, but I can get that this weekend also.
As for the Satellite, he needs to dig up the key for the trunk so I can grab those tail lights and panel; he promised not to crush it until I can get those off of the car. I was able to get the k member and 2 steelies, since they were in the front seat
He said he just bid on a couple of cars, one being a running, driving '74 disk front Duster that, if won, will be delivered around the 15th. I gave him $50 this afternoon and he'll hold the control arms, spindles, calipers, rotors, prop. valve and master cylinders until I can get back out there to pick that stuff up, so it seems to be working out. I'm crossing my fingers in the meantime.
He should atleast put the V12 up on ebay. Can't put a good engine to waste.:angry7:. what kinda rims were on that white duster? they look kinda nascar/dirt trackish. never seen ones like emCan you believe he's gonna crush that thing, V12 and all? I'm told that the body is some sort of aluminum alloy that'll fetch big bucks.
I asked for the calipers, but they're long gone.
He should atleast put the V12 up on ebay. Can't put a good engine to waste.:angry7:. what kinda rims were on that white duster? they look kinda nascar/dirt trackish. never seen ones like em
No pic showed up?? What size are they?If you like those wheels you're welcome to them.