Fab'd and installed an enclosed buss bar and ground post station to support the trunk mounted battery. This will power the rad fans, 110A alt, MSD AL6, etc on my '68 Dart GTS. Securely mounted with stainless rivnuts. I'll post more details in technical forum post.
What Are You Doing To/With Your Car Today?
- Thread starter MobileCustoms
- Start date
-
Dartswinger70
Well-Known Member
Did some grinding on some welds...getting ready for a coat of 2K then a final block sand...
LocuMob
Fluid Technician
Finally put my sway bar back in my '71 Monaco wagon.
33IMP
Well-Known Member
Loading up one of my 55 chevies in socal, for its trip to its new home in Arizona. The other 55 goes next week.
driving from the Mopar Nats in Columbus to Moparfest in New Hamburg ONT!!!
Going to put bucket seats and wheel well trim on one of the 71 dusters today...parts have been in storage for many years so we are checking for black widows and brown recluses....Dad is 79 maybe too hot for him today..it's gonna be 96° ...maybe too hot for me in the direct sun....I wondered how my buddy runs his roofing crew in this heat/humidity..he says you have to get out super early and let your body acclimate to the temp....when too hot they have to come down...shingles begin to melt and tear from walking on them.....
Can't fathom having to look for those creepy crawlers. Up here near Detroit, we have to look for icicles!!
Another nope, nope, nope for me!! Might have to get me a blower for the avatar to run away fast enough!!
After 5 years on the shelf, I finally got my bumblebee stripe on. I love the way it looks.
I absolutley love your paint combination with the stripe. Beautifule ride.
72Dart6pack
Harder Better Faster Stronger.
Before & After. Gold photo 318 2bbl
Black photo 408 Six Pack. 5 years apart. But the exact same car.
Black photo 408 Six Pack. 5 years apart. But the exact same car.
OK... back on track. Had to replace the pressure switch on the compressor.. but got the paint wrapped up yesterday. Cleaned up the hood torsion bars and got those done as well. Ready for gaskets and wiring next.
mopardude318
Well-Known Member
I put a steering stabilizer on my ‘74 W200. I painted the diff cover the standard colors anything oughta be painted. I’m tired of black. Anyways, works great. Tightened up the steering at about 90 mph. Feels good.
Finished putting the new clutch linkage in place of the slipping bolt one that I took off. New clutch set over the last couple weekends .
Replaced shift linkage cotter pins with the correct spring clips and washers also. Thanks to Brewers Performance for having the parts.
Replaced shift linkage cotter pins with the correct spring clips and washers also. Thanks to Brewers Performance for having the parts.
Update, I showed a friend the truck and he bought it for twice what I paid for it
-
