What will it Run?

-
70aarcuda

70aarcuda

Master Hoader of SBM
Legendary Member
Joined
Jan 16, 2005
Messages
16,639
Reaction score
5,967
Location
las vegas
1973 Duster with 360 .030 KB 107 piston zero deck. 10.5 to 1 compression
H Beam Rods, Internally balanced crank ....
Eddy aluminium heads, no porting...
Hughes 230/237 hydraulic cam with 1.6 stainless steel rocker .550/570 lift
Eddy Air Gap.....Holley 750 DP, MP Race Electronic Distributor with Chrome Box.
TTi header with full 2.5 inch exhaust.

Turbo Action 10 inch converter ...suppose to flash 3600 with 360
727 trans with TA manual valve body
8 3/4 with 4.30 gears.....9 x 28 MT slicks

Dont know what it weights...but full interior with buck seats all...
Weld wheels all the way around with skinny tires up front.

Factor in Vegas elevation so add 3 tenths to guess...and factor in old man driving...70+ year old...LOL

if you are coming to MATS...come by and say hi...
 
Watch out teasing poor old Ted! Wait till he comes out of that "semi" retirement and drops a string of .00X lights on all you youngins. :D

Oh, and I think he'll be real comfortable laying down a bunch of 11.50's all over the competition. :thumbrig:


Have a blast guys & gals!!!
 
perfacar said:
12's maybe?? launch will determine how fast..
Click to expand...

I'm probably in agreement with this.

My combo goes 11.70's and is a dart with 440 10.5:1. Eddy aluminium heads, no porting... [email protected], .528 cam, Eddy Air Gap, Holley 950 DP, MSD dizzy and box, TTi headers with full 3" inch exhaust.

10 inch converter ... to flash 3500
727 trans with TA manual valve body
dana with 4.56 gears.....12.50 x 28 MT slicks

Dont know what it weights...but full interior with buck seats all...
Weld wheels all the way around with skinny tires up front.
 
70aarcuda said:
this weekend at MATS.....
Click to expand...

If it was anyone else I would say high twelves but after seeing what your other builds did I am very optimistic. The only thing that might slow you down a bit compared to the others is the interior.
 
Well Tony, I'm looking forward to this and wish you the best while your at it.
Be safe!
 
I am kind of like Ted guess...mid 12 in Vegas....not enough cam ...converter and weights too much to get into the 11s...

we will see on Friday.....suppose to be warm here too...mid 80s...

Hopefully...the scales will be open and we can get a weight on it...
 
roccodart440 said:
I'm probably in agreement with this.

My combo goes 11.70's and is a dart with 440 10.5:1. Eddy aluminium heads, no porting... [email protected], .528 cam, Eddy Air Gap, Holley 950 DP, MSD dizzy and box, TTi headers with full 3" inch exhaust.

10 inch converter ... to flash 3500
727 trans with TA manual valve body
dana with 4.56 gears.....12.50 x 28 MT slicks

Dont know what it weights...but full interior with buck seats all...
Weld wheels all the way around with skinny tires up front.
Click to expand...


what year dart? mine is a 73 is close to yours except i have a tunnelram,2 750 holleys. also i have one front seat and rear seats.before i put the exhaust on my car with me in it weighed 3520. also this was with around 10 gallons of fuel. got any pictures of your car?thanks Mopar65
 
mopar65 said:
what year dart? Mine is a 73 is close to yours except i have a tunnelram,2 750 holleys. Also i have one front seat and rear seats.before i put the exhaust on my car with me in it weighed 3520. Also this was with around 10 gallons of fuel. Got any pictures of your car?thanks mopar65
Click to expand...

1969
 

Attachments

  • 1546285_10204960775688529_4722710379513782464_n.jpg
    51.4 KB · Views: 382
  • 10710645_10204960776168541_6478736207285150250_n.jpg
    48.4 KB · Views: 390
  • 1002379_10204960776568551_5300935339510559855_n.jpg
    41.4 KB · Views: 388
You must log in or register to reply here.
-

Back
Top