what is he building you?im wanting to know.im jealous
not sure if it is something to be jealous about, I intended to have this done later, rather then sooner, but I threw a rod bearing and that kinda forced my hand
Mike will take my 75 360 and add the following :
SCAT Hyper/cast stroker kit balanced internal
Timing tensioner
Main Studs
New Damper(for internal balance)
Gasket kit
Prime/paint
Bore/hone cylinder w/plate
Deck block
Main hone w/studs
Stage 2 head porting w/HP valve job
Block oiling mods, de-burring, cleaning
Assembly
$3500
Add $525 for dyno with oil, filter fuel
Add $450 Proform 750 carb w/Russell fuel line
Add $50 for dist recurve if needed
Add $160 for 2.02/1.60 HP valves and lock kit
since I got that quote from him I figured out the skip white distributor I have on there isn't something he can recurve so he will work over the stock distributor and use a FBO box and coil instead
(be on the lookout for the skip white distributor and coil in the for sale section soon)
I think the upper part of the quote should yield in the 430-450 HP area, with a bit more coming from the larger valves