Search results for query: *

Finally got around to striping the magnum down. every thing but the heads went to the scrap yard. I cleaned them up with my dremal and wire wheel and don't see any cracks I would like to get 50 + shipping and these are heavy(probley take 70-90 to ship them depending on were they go. there...

392 stamped oil pan and distributor. Oil pan is for has a few dents and dings and comes with the pickup tube Distributor has very little shaft play and holds vacuum. its single point vac advance. Has brand new cap and rotor 25 each plus shipping from 72830. pics upon request.

904 tc and flex plate from 318 magnum. Flex plate has been "modified" to bolt to the torque converter Torque converter was from a /6 trans but will work the same for v8 904. 40+ shipping for both. Ships from 72830. pics upon request.

Have the complete inereds for a 904 transmission. Drums gears shaft spedo gear bolts tail housing pan and bolts. Basicly every thing except the casing. All parts are name your price best as long as it covers shipping and my troubles. Located in Clarksville ar. Every thing is in good shape.

Lots of misc parts for sale. Also parting motor. I will be pulling the heads today to inspect the heads (magnum heads). Surpintean setup. alt, ac compressor, tensioner pully and crank pully and harmonic ballancer if you want it its all of a 318 internal balanced magnum (no power steering...

Is there a big block swap guide or sticky any were? I can't find one on BBD.com The only place iv really found with helpful info is on Schumacher s web site (other than the header tech on BBD I know I need the swap mounts, radiator, oil pan, headers, what els is involved? I see a bunch of...

Sorry, couldnt think of a "short" way to title this thread. I need a little help figuring these two parts out, well one isn't actually a part First, what is this bracket for.[/IMG] And second, what are these holes for, the two directly below the wiper motor[/IMG]

Title says it all. Ran on a 318 that was pulled ~ 2 months ago. been siting on a shelf in the garage. Ran fine when pulled missing all the choke parts but other than that its complete. Would like 75 shipped in the 48. Have pics apon request

I have some magnum heads I need to sell to fund a big block, there off of a 318 put from my research, there the same for 360 or 318. I'm not sure if there are any cracks, again from research cracks don't effect performance so long as its not cracked to the water jacket which I'm sure its not...

For sale holley 650 dp, mechanical secondaries missing all the choke parts but the carb it self still functions fine. If filled the bowls with gas and it squirts fine, I have never ran it so it may or may not need rebuilt. It has been cleaned since pics. would like 90+ shipping. [/IMG]

Pro comp air gap (eddy copy) for sale. Brand new never used or bolted down. Would like 150 shipped to your door (48 states only) magnum heads also available. [/IMG]

I'm selling my project car, I haven't the funds time or space any more so sell is forced. Its a 70 duster origanl /6 power steering non ac car The out side needs lower rear quarter on both sides and some dents and dings taken care of. No rear windshield but the rest of the glass is there. The...

I have a compete magnum top end. Heads intake and holley 650 dp mech secondaries. Intake is brand new pro comp air gap (eddy copy) Heads are magnums from a 318 but from the research if done, the 360 and 318 heads are identical. Carb is a holley 650 mechanical secondaries, could use a good...

I need to replace the seal from the door to the window the piece that is inside the door that seals to the window. I tried a little search but came up empty. Were can I buy this and any tips on install. Thanks

70 duster I know I know I know. I'm beating a dead rotten horse, but i have "surfed" and searched till my "board" broke and eyes crossed. So.... what tire can I get a way with on a 15x10 wheel and have it sit as flush to the fender and have it tuck a a couple inches? It don't ha e to be a very...

Got me some wheels that i m going to put on duster, so I started to loosen the lugs on my car well an hr later I'm pissed. There not budging one damn bit. I keep at and keep at it, I'm sweating like a pig (100° here in Arkansas and high humidity) I think, well mabey I'll try to turn them as if...

Drip rails and window trim both front and back from a 70 duster. All in good shape Rails 60 shipped in the 48 states Window trim 100 each or 175 for both shipped in the 48 states Located 72830 Clarksville ar. pm for more details.

Found this snooping on eBay just now. sounds like a hell of a deal to me. What do you guys think?http://item.mobileweb.ebay.com/viewitem?itemId=200955692987&cmd=VIDESC

Power steering pump from a /6. not sure if it will bolt to a small block or not Can get some pics upon interest How is 50 + the ride sound? Make an offer Ships from 72830.

How would one retard timing with out the popular msd btm. Seems that 400 is a lot for an electrical box. Paying for the name? Is there some type of mech dizzy that can be setup to work? I know the timing makes or breaks the motor due to detonation. I'm in the very early stage of planing and...

I have a antenna wire with the mounting bracket thing and rubber gormet for sale. its from a 70 duster. No antenna though, looks to be in good shape. Needs a little cleaning then will be good to go. 15$ shipped in the 48 states. pm for any questions. thanks [/IMG][/IMG][/IMG]

I'm building up a 70 duster origanl / to v8 swap the od I'm sure has rolled over a time or 2 and the od reading on the title is exempt. I was wondering if its a bad idea to roll it back for a fresh start to make it a little easyer for future servicing (plugs wires oil changes etc). Bad idea?

70 /6 duster Didn't want to start a thread but I'm at a loss and starting to get frustrated, I'm swaping from a /6 v8 so it will be an alt from a 96 dodge truck. Here's a pic of the wires I need help with. There is 2 green a red a black and a couple others that connect to a 3 prong female...

I'm looking at a carb. Its a holley 4777-4 650 double pumper. Iv notice a few thing that are missing. I'll post them hear so mabey some one can tell me wat part that is and were I can find a replacement and the over all price I should pay. Right now were at $200 for a radiator stock 318...

I have a 318 magnum that needs a carb dizzy oil pan and a few misc bolts and pickup tube to be and some headers to be complete Has Mr gasket .028 compressed head gaskets (should put it right at 9.5-1) brand new procomp air gap (eddy copy) came from a 96 ram with 60xxx miles. I have the...

I'm building up a 318 magnum, I used Mr gaskets .028 head gaskets and with the magnum heads and .050 in the hole puts me at 9.5-1. I'm down to selecting the cam and I'm using a /6 converter out of a 70 duster. The converter is natural balanced and the 318 is internal so it all bolts to better...

Found this guy on my local craigslist. Says is crushed 3-400 dodge and Plymouth cars and has a lot of parts he's pulled from them. Don't know if he will ship stuff but wont know till you ask. http://fayar.craigslist.org/pts/3908586179.html

4-14" hub caps from a 70 duster. I'm about 90% sure there at no dents or major rash on them. Also the chrome is in fair shape if memory serves me well. There at my buddys house on the car and can't go get them right this minute. I will ha e more close up pics and more details upon interest. Make...

Have a 70 duster grill. I'm 90% sure its all in tack with no cracks or any thing. Iirc the chrom is in good shape as well. Its still on the car and will be further inspected upon removal if any one wants it. Turn signal pieces and any thing related to the grille will be sold with it. MAKE a...

Any one make there own tools or modify tools they already own? post them up and share your handy work. here's what I had to do today cause im cheap and needed a set of snap ring pliers, so I took a junky pair of needle nose pliers, a grinder and made my own. They work once but may not the...