Been too quiet over there for sometime. I think they know it's a problem but haven't addressed it. We had a nice get together in Marlboro a few weeks ago, had a blast.
Tom
Try some 1/8 melamine/fiber board, use a fabric or carpet from where ever. The biggest challenge will be to secure them to the sides. Use some cardboard to make templates, I used some Cardboard to make my speaker box fit tight before the carpet went on, now that it's on it is really tight.LOL...
Well if you can stay in it, I'd bet the ET and MPH's would be where you want them. A little gasket matching shouldn't hurt I'd think. Make sure you won't run out of Revs with the new gear on the top end and You should be good to go if you can run it out.IMO
Tom
I have the same carb, came with a sweet DVD that has all that info in it. I've had real good luck tuning it so far. Pretty simple, the only thing tough to set is a happy medium on the electric choke for all weather situations. Mine came with some secondary springs for tuning and clear sight...
I'd think with the combo they sent you you'd be there already? Sounds like tuning is needed, the MPH seems low for the Cam/Compression and such.
I run a Smaller Hyd Crane 302 cam with Iron heads and 3.23's in a portly 3700+lb Ebody to 109mph traps and a cheap 2500 stall verter with a SB...
Thanks, I did some Electrical work for a local Bike Shop and worked out a trade of sorts, there is over 6K worth of bike there, thankfully I haven't been able to do too much damage to it. I don't ride it easy.LOL I was always warping rims and blowing out shocks doing some medium sized drops(6'...