Recent content by Taconite

Good question. My 1969 Cuda 318 engine was orange.

Not sure what compline is. It was gold colored I painted it flat black when I got it. Not sure why the photos make it look gold?

I have a disc brake caliper it is for the front passenger side. I bought this at Autozone a year ago and I have never used it. Still New. It works on Mopar 65-72 A body. $80 obo

i would consider large for the rear. Like 225/70/14.

I have a mechanical fuel pump shown below. There is a threaded outlet. I don't know the thread size. I tried 1/8" NPT a 1/4" NPT and it is not either of those. Anybody know the correct size?

I think I screwed up. I bought a disc caliper from rock auto (seems these are handed). When I took off the old caliper I noticed that the bleeder valve and brake line tying it together where wrong. So these are handed.. Is the reason these are handed is to get the air out with the bleeder...

I have a 69 Cuda that is a column shifter.. It was a 904 and now it has a 727 reverse shifting pattern. The shifting linkage for the Column to the transmission is incomplete and does not function properly. So, I am thinking of adding a floor shifter. I like the Lokar linkage shifter it seems...

10" 904 Torqueflite Coan Converter for sale Low milage, no issues, ran with COPE transmission. 3500 RPM Stall ship to lower 48 for $325

thanks for the advice! If they work good I hate to spend all the cash on different front brakes.. Plus, new front wheels . I pulled the caliper tonight. I am going to try to pull the pistons and see if they are scored... any tips? Was thinking two pry bars?

I have a old barracuda with factory disc's. One of the caliper is stuck. It has been a few years since I drove the car. I was thinking wether I should up grade the brakes or stick with the factory set up? Thoughts for those who drive factory disc brake cars?

Just got 66 cents in the mail.

RIP Bruce!

Where do these kits start at? The fuse box? Or, are these from the fire wall foward? I am looking to re wrie from the fire wall forward.

The center chuck is only about 5 years old. I bought it as a complete center section from Mancini Racing. I probably have 300 miles on it. This past winter I pulled the rear end, center chuck, axles to repaint it. I replaced the fluid with a 90W with the sure grip additive. I have put 0...

I have an impact so I will give it a shot