Search results for query: *

  1. pettybludart

    Best headers in a early abody?

    I,d have to do some digging for part#, but I ordered from Summit Racing about 6yrs ago(not sure if they still carry them?Maybe look or call Headman?.
  2. pettybludart

    Best headers in a early abody?

    I run Hedman Hustler fenderwell headers(1 7/8 ) in my Early-A 66 Dart.TTi sells under chassis 1 3/4 step headers now.Good luck.
  3. pettybludart

    early exhaust

    Yes Layson,s sells shorty headers for Early-A.
  4. pettybludart

    Chassis headers vs Fenderwell headers

    Those look like 1 tube go through the fender well?
  5. pettybludart

    Header wrap

    Save yourself time and aggravation.....get them coated..money well spent.JMO
  6. pettybludart

    muffler placement

    Most guys would just undo exhaust at the headers and tie them out of the way(not remove complete exhaust)LOL.Anyways,I,m good Josh,just have a ton of stuff to do today.Weather is cold this morning(29*F)Gotta have everything put away for winter days.:D
  7. pettybludart

    muffler placement

    Just remember if you ever have to remove the trans.,you don,t want to have to remove your complete exhaust to get the trans. out.:D
  8. pettybludart

    muffler placement

    I think your gonna want to add a bit more length to the pipe Josh.You,ll want your mufflers back under the rear seat area,with tailpipes added or turndowns/turnouts.Think of where your exhaust fumes will exit.:D
  9. pettybludart

    collector hangs low

    Josh..DON,T I repeat DON,T use a floor jack to try and bent.Guys have been stuck with them hanging low for years now.:wack:
  10. pettybludart

    What do I do with this?

    Totally unacceptable!He obviously has never worked on a rear wheel drive car with a driveshaft.REFUND!:wack:
  11. pettybludart

    "Tight Tubes" 65 Barracuda 273 ?

    Power steering...want headers?Gotta go fenderwell or look for some 340 manifolds.Also certain year 360 mag. manifolds for better breathing.:D
  12. pettybludart

    Exhaust size for HP

    Go stainless steel if you can afford it.Mines been on my car going on 15 yrs.
  13. pettybludart

    small block fenderwell headers

    I ordered my Hedman Husler 1 7/8 coated fenderwell hedders thru Summit(few yrs ago).If I recall they were close to $800 $$.They,re still in the same condition as when I bought them.:D
  14. pettybludart

    Early A exhaust manifold/header help!!!

    Come on John noes the time to set up the jig and start making Dillinger Early- A Body headers.LOL.Guys are always looking for another option other than Spitfires or TTI,s.There,s always fenderwells.Good luck.:D
  15. pettybludart

    68 baracuda 340 s

    TTi step headers are about the biggest you,ll get without cutting your fenderwells.I was in the same boat before the tti,s came out with the step headers.I ended up cutting and using the Hedman Husler 1 7/8 fenderwell headers.Good luck.
  16. pettybludart

    Pipe source-google fatigue

    Up here in Ontario Canada we have Metal Supermarket.
  17. pettybludart

    Help! Headers 67 dart 340 brodix heads

    My Hedman Huslers all the tubes(1 7/8) run through the fenderwell,but then again mines an Early-A.
  18. pettybludart

    my 1966

    Power steering or manual?1966 Barracuda,s came with 273,s.Are you sure they,re 273 manifolds?
  19. pettybludart

    408 stroker header recommendations?

    TTi makes 1 3/4 step hedders(chassis),that 408 is gonna wanna breath.JMO P.S spend once and get the coated ones.
  20. pettybludart

    1966 Barracuda headers, fenderwall or not?

    408 with Hedman Huslers,I bought from Summit.I don,t have the part # off the top of my head(has been 2 yrs)Go for the coated ones if you decide to go this route$$$.:D
  21. pettybludart

    Header tube/T Bar

    I,d check with Summit first for the same mounts.Sometimes they sell parts cheaper than the supplier.Maybe bulk buying?I know they sell Dougs hedders cheaper than Dougs.Just sayin,to save you $$$
  22. pettybludart

    1965 dart headers????

    1 7/8 Heddman Huslers on my 66 Dart race car..bought 1 month before TTi made 1 3/4 step hedders.Figures eh!
  23. pettybludart

    1965 dart headers????

    TTi sells hedders also for Early-A,but are pricey also for COATED ones.You can take your crossmember of and notch it for duals.Good luck.
  24. pettybludart

    Fenderwell Exhaust

    Mine..
  25. pettybludart

    what headers are these?

    Won,t fit early-A,you,ll need either.. SpitFires Dougs TTi 273 or 318 manifolds or with some custom work,theres a magnum manifold that will work with some work.Good luck.
  26. pettybludart

    Broken manifold studs on my 4.7 PITA!!!!!

    Sounds like a common problem,I,d replace them all while your at it.JMO
  27. pettybludart

    Hedman fenderwell header pics

    I haven,t had any burned paint with these being coated $$$$,you can actually work on the engine after about 10mins after a pass.I can also hold my hand about 3-4 inches from them after shutting down.The coating works amazing and no discolouring so far(after 1 year)
  28. pettybludart

    Hedman fenderwell header pics

    Good pics!Good idea about the sticky too!Here,s my Heddman Huslers on my 410 SB with solid mounts. 496 this year I,m adding some rubber mounted supports at the collectors.One of my tubes cracked at the flange#-o last season.(fixed now)Just a heads up.
  29. pettybludart

    Fenderwell headers

    Checkout Summit Racings site,under exhaust.I bought my Hedman Hussler fenderwell hedders from them.Good luck with your search.
Back
Top