Search results for query: *

Early 70s A-body floor shift console. includes linkage, sheet metal shifter seat, one sheet metal bracket. I believe all the linkage is here. Will need some bushings, clips, & hardware. This is not a perfect piece. driver quality. some pitting in chrome bezels and shifter. glove box button...

$1500 1973 340 std bore block & crank cleaned and ready for machine work. Block will need a .030 bore and crank will need .010 on the mains and rods. It comes with orig rod & main caps w/bolts, orig stock pistons & pins (Two have rings stuck), and orig rods. Also included but not cleaned are...

Any suggestions on a cam for my 340? I'm looking at ordering everything to be a match set. Such as Cam, Lifters, Push Rods, Springs, etc.. Many to choose from, thought I would get some input. I'm working with the following. stock 340, J Heads Edlebrock Air Gap intake & Edlebrock 600...

Will a sb bellhousing part number 4202507 on a OD A833 work in my 70 Dart?

Looking to buy a good condition small block A833 OD Bellhousing. I believe the casting number is #3743645. Located in Indiana, 46036. No cracks or welds please.

Im considering opting for a hydraulic clutch kit conversion in my 70 Dart.. Any suggestions or threads you can link me to would be appreciated. Also here is an FABO thread link, I'm looking for a bell housing SB 833 OD...

I have this 1971 Dart & Parts looking to make some deals in trade for a few things I need... All parts located in Elwood Indiana, 46036. i would be willing to travel a few hours to make a trade. Shipment possible on smaller things. For Trade: 1971 Dart Parts Car (Orig /6 Auto) Indiana...

My Dad sold his 1969 F6 Green Swinger in 1984 in Elwood Indiana. The car was seen for a few years after near Frankton, Marion, & Wabash Indiana until late 80's or early 90's Details about the Dart... it still had the ball for Z-bar crank located on frame rail, 4 spd hump removed covered with...

I am converting my A-body 8.75 to 4.50 bolt pattern using yukon axles. I plan to use 11in rear drums from a C-body. My question is... Was there more then one style of rear drum back plates used on C-body or can I use either width of shoe and drum? I found a shoe near what was left of a 68...

I need a 1966 B-Body Auto Column shift steering Column W/Manual Steering & linkage... looking to convert a 65 Plymouth (Cable style) to the 66 Automatic Column shift linkage style! Gold in color complete with steering wheel would be great, however just the column and linkage in any color...

Looking to trade a"NEW" 5.7 HEMI (Truck Engine). The engine is complete with stock intake & Injectors, Truck Exhaust Manilfolds, Pan, Plugs, Wires, and Engine harness ready to be plug into your truck computer. No computer included. This engine is all complete! This is a new engine NEVER...

Looking for the following parts A-body 8 3/4 (Prefer Complete) A-body 4-speed Trans & Bellhousing (Prefer Late 60's or Early 70's trans). and linkage. A-body Clutch & Brake assembly (for a 65 Dart) I assume anything 63 to 66 will work... Please correct me if Im wrong. Located in...

I just installed the Summit motor mount conversion kit 340/360 to /6 K-member on my 70 Dart. It works well for only 60$ Two thumbs up! The only problem I am having is that my Saginaw power steering unit hits the front of my driver side engine perch on the K frame. It doesnt allow much...

Looking for an old Hurst shifter (Shifter only), nothing special, gonna make a shifter for my 96 S-10, need something 12 inches or more and bent or with some tilt to it! like the one in this photo! not looking to spend much just a little project for my daily driver! the shifter could be broken...

I would like to go manual Steering in my 70 Dart... I like the feel of the manual steer over power, and more room for headers is always a plus! Also looking for a manual shaft to turn my 70 (floor shift) steering column into a manual! What do you all think or your preference on Manual vs...

I'm already looking forward to Spring! Here in Indiana Nov in my opinion is the begin of Winter!!! Not the coldest temps for the region yet but getting cold enough! :sad10:

Posting for my Dad, he is looking for a SOLID Driver 64 to 66 Dart... Would prefer a V8/Manl-Trans however open to all offers! Would consider a good body needing engine!

Since I first loged onto FABO a number of years ago I have always considered FABO as a friend! My good friend FABO has introduced me to even more good friends! I would now say today FABO is one of my best friends... When i post something on FABO I treat the site as I do all my friends...

Found a good Car, Truck, & Industrial auto parts specialist in Indianapolis Indiana, "Van's" I could not find a float at the "commercial" stores for my Holley 1920 1bbl and was referred to them by a private owned parts store! They seem to know their stuff and gave good customer service and...

Anyone know where I can find an Oil pump for an 83 to 86 slant six? Dealership, NAPA, AUTOZONE, ADVANCE, Etc. has it Discontinued... Engine is from a truck!

2005 Crate HEMI 5.7, Complete intake to pan, injectors, exh-manifolds (truck), Etc. $4000.00.... Or would be willing to trade for a 64 to 66 Dart V8, or old 40's or 50's Dodge Truck! This is my Dads engine, bought for a Willy's coupe and later decided to sell all, Coupe is gone! Show me...

I stopped today and looked at a 74 Charger SE, 400, AC, auto column shift black/black... decent body some rust mostly in qtrs, few dings along side but straight, some faded paint. interior was ok no rips but was dirty and needed a good detail and cleaning, carpet was dirty, dash was dusty and...

Looking for an FM Radio converter that works!

Help search and post pictures for Televisions & Movies A-body Mopar's! (please post picture and list name of movie or tv show) Private eye Joe Mannix on the detective drama MANNIIX/CBS/1967-75 1968 Dart 383 Convt.

We can't forget about Married with Children's Al Bundy and his love he had of his faithful A-body's!

I would like to thank baccaruda (Gary) for selling me this 1970 Dart. He gave me a really good deal and I greatly appreciate all his effort when selling me this car! After posting a want ad here on FABO, Gary responded offering to sell this 1970 Dart. After Gary emailed me over a 100...

Hi all... I'm buying a Dart from a fellow member and I need some advice or tips when it comes to title the out of state vehicle. Im sure it varies with different states, however I would appreciate the help, advise, or tips. The car is currently titled in Rhode Island and will be titled in...

My Dad is looking to trade a New still in wood crate 2005 5.7 HEMI Magnum engine intrade for a 64 to 66 Dodge Dart solid Driver car. The stock Hemi is complete from Fuel injection to pan, complete with exh-manifolds, injectors, plug wires, fly wheel, spark plugs, all new never used. Dad...

Looking for a 70 or 71Dart 2dr. Would like to find a decent runner or good body. any engine or trans combo. looking to spend a couple thousand or so. show me what you got. Thanks

Looking for a solid straight 71 dart body/shell. Within 350 miles of Indianapolis or if a deal can be made to meet half way. cash or trade, I may have some parts your looking for... heres a list of some i have. I am parting a 74 Dart V8 disc brake A/C car, 1996 360 mag complete engine, 8.75...