Search results for query: *

I am removing the glass from my 68 Fastback, I have laid a blade against the glass and cut the old gasket all the way around. I can see the edge of the glass when I look at where it is sitting on the interior section of the gasket yet I still cant push it out. Do I need to take a blade around...

so I am selling my house and moving, my car is currently just a body, trunk and hood removed, no drive train, no front end. I need to get the car on a trailer but am struggling to figure out the best way to go about it. Body wheels/cart seems to be the most realistic way to go, but at 400 a set...

looking for the stainless piece that covers the seam in the middle top of the windshield.

Took out my center section and was supposed to find a 3.23 suregrip but unfortunately that isn't what was in there. In the market for one, 741, 742, 489 let me know what you have. Local definitely preferred as I know they can be shipped but if I can get away with not paying for it I will. Thanks

Leftover parts from a car I no longer own. 20.00 shipped in the US.

I see a lot of people using the express setup but I was thinking the retro series may be all I need. My car will essentially be a stock 68 Barracuda, nothing special except electric choke, a/c, and mopar electronic ignition. Any info is appreciated.

I cant seem to get my shifter handle out. I know how it is supposed to come out. I know I have seen the other posts but I am not seeing any visual examples, and for the life of me I cant get a shim in there to pop anything loose. I have been spraying this thing down daily to try to break it up...

I really liked the Classic Air setup, but after speaking to them I have to have power steering to use their system. Anyone have a recommendation for A/C with manual steering? The car is a 68 Barracuda with 16:1 Manual Steering, 4 Speed, 318

If this is considered a dumb question I apologize. Rear axles is my weakest point of knowledge. What has to happen to use a large u joint for an 8 3/4"? I have 1 car that came with it done on an 8 3/4 and one that is the factory small u joint. I'd like to be able to switch the center chunks...

when I got my car it was 100% together except for this piece. What is it? It was in my trunk. My first thought was it is for the trunk divider, but I'm not sure. Thanks for the help!

It seems with the site update I can no longer use forumrunner app for accessing the site on my phone. Is there a different app suggested for use? Thanks

First time removing LCA's and having a bit of trouble. I followed everything in the service manual and have double checked everything. I have nothing holding the LCA's on the K Member other then the pin from the k member that goes into the control arm bushing. I have put a pry bar to the control...

Ripping my car apart for a full restoration. I will be doing the majority of the work myself along with help from some very experienced and skilled people. I have a 16:1 manual box that is stock from factory with a ton of miles on it so I probably should have it rebuilt. Is it a difficult...

Looking local before I spend dumb money to have repop quarters shipped to me. Need quarters for my 68 Barracuda. I am in Indiana and would like to see if anyone has a parts car with good metal that I can cut from. It's a long shot in this rusty area but I have to ask. Need mainly quarters...

Who has done this? I did some research and it seems almost too straight forward so I was wondering what issues I may run into. Thanks

Getting ready to have my UCA's, LCA's, and Strut Rods sent in to powder coat. For those who have done this what parts do you make sure do not recieve powder coating? Is it just the threads I should worry about or should I make sure they steer clear of where the bushing press in as well...

Hey guys, getting ready to put my 2 bolt aluminum master cylinder on. Also switching from power to manual brakes. I have a master cylinder I scored a while back but I need a new bushing for my manual push rod and I also need the dust boot that goes on the inside of the firewall. Ive only found...

Looking for the bracket from scarebird for 10" drum conversion. Going to buy it anyway but I figured I would see if anyone has a set they aren't using before I do so. I would have bought Mopar Tim's setup but I have already purchased all the necessary parts. Let me know. I am in Indianapolis

Bought for a 65 Dart that is now sold. It was taken apart when I bought it, everything seems to be there minus the fuel gauge and glove box lock. Headlight and wiper switch knobs are there. I purchased it for the plastic and housing alone so all gauges were just a bonus and therefore I do not...

Great shape not cracked, may fit other years but I am not sure what else. $7 to your door.

In good shape. $25 to your door. 67 and up.

I thought I had read somewhere that applying some heat can tighten loose vinyl right up on door panels. Can someone give me more direction with this? Thanks

Did a search and found a lot of mixed info. So I'll just ask what size tire everyone is running. I read that the biggest you can put on is 195, but then read someone say they run 235.

Is it satin like the dash or were they glossy like the doors?

Hey guys, I am going to be replacing the gauges on my 68. The factory tach is shot so I am buying that now and will replace the speedo and quad gauge later on. I want them to match when I do so I want to know about people's experiences. I put aftermarket gauges in a 69 and they worked great for...

Saginaw pump, has been modified per the mopar action pump it down, but can easily be undone. 35.00 shipped in the continental USA

Bought for a 65 Dart that is now sold. It was taken apart when I bought it, everything seems to be there minus the fuel gauge and glove box lock. Headlight and wiper switch knobs are there. I purchased it for the plastic and housing alone so all gauges were just a bonus and therefore I do not...

Has anyone had their wheels widened? My barracuda has its factory 14"x 4.5 steelies on it and I want to keep that look, but man a 195 tire is just too narrow. Is there anyone who makes a wider wheel that won't break the bank? What were the widest SBP steelies factory made 5.5"? Thanks for the help!

Out of a 76 Dart. Purchased for a car I no longer have, now I have a 4 speed so I do not need this anymore. Pick up only. $50.00

Hey guys, question about the celebrity caliper install on Scarebird style brackets. I understand that the calipers are single piston and therefore need to slide, but if I torque the caliper bolts to spec on the brackets I don't understand how I will get any movement. The metal sleeve that the...