Search results for query: *

I have a new set of Aerohead 452 heads with 2.14/1.81 valves,comp 911 springs up to 510 lift and stock ports.Would like to sell for $500 or best offer!They are located in LaFollette Tn!That includes shipping.Will need to be cleaned up as I built a 383 and installed them but never ran!Here is...

I know it aint going in an abody but this is for my 83 D150!30 over 383 with KB400 pistons,Comp Magnum 280h cam,Aerohead 452 heads with 2.14/1.81 valves,Stock 4barrel intake with slight portwork,650 holley dp,Hooker headers and stock rockers!Should be around 9.3 comp with pistons .024 in the...

I have a buddy that has a new crower 271 cam with 222/234 with 485/495 lift and 112 lobe and wants to sell me for good deal.I have post about the build in small block tech if you need to check,but I have comp 280/480 cam with 230@50 on 110 but will it be better to change to crower or run the...

I have an extra 383 block left that is gonna have to be built and was wondering how this combo does and see some builds so let hear em!My 383 that i am building now is temporary!

I am looking for few parts for my big block 383 truck build!Looking for oil dipstick,tube and adapter that screws into oil pan for rear sump truck pan.Also B&M truck megashifter or starshifter with everything to install and need holley 750 4779 carb!Just pm me and I will pay for shipping!Thanks

Hey guys, I am in need of pistons for .030 over 383!I am using 906 heads and will use either kb400 pistons or speedpro 2315!If I go flattop i can mill the heads or use the domed pistons to get compression up!Will need to buy some by the 27th!Just pm me.Need to get them cheaper than 350 bucks!Thanks

Ok I have got rid of all my smallblock stuff and have started collecting parts for my 383 build going into my 83 D150 2wd.All i have to get is a crank,pistons and rings,harmonic balancer,headers,carb and fuel pump,water pump and heads which i have been talking to Mike at MRL Performance.So i am...

Im getting ready to build a 318 bored 40 over and stroked to 392!Here is the specs! 1.Eagle 4.00in cast crank. 2.Eagle SIR rods. 3.KB forged dished pistons. 4.Eddy RPM 60779 heads with 63cc with stage1 port job and milled for 10.2 comp. 5.XE275HL cam with 231/237@50 and 525/525 lift on 110CL...

Ok guys,I almost have my smallblock 318 done for my 83d150!Now my wife bought me a 68' 383 block with standard bore and crank.This is gonna be my next motor for the truck.Here is the build i have in mind! 1.Block bored .030 over with reworked rods and KB400 pistons. 2.84cc eddy rpm heads with...

I would like to hear some builds and et's with xe268 or xe274 cams if someones running them!Thanks

Well,Talked to Hensleys performance yesterday and my 70' 318 is getting bore 40 over with kb167 pistons and eagle ibeam rods!318 crank is getting polished and magnafluxed and XE268 cam with 224/230@50 and 477/480 lift!For the topend the performer rpm heads are getting Valve job and hensleys...

Hey guys,I have a bare 383 block with main caps that came out of 1968 newport that is dated 9/17/68 that i would like to sell for $175.00 or trade for 360 heads with 1.88/1.60 valves!It is standard bore!I am located in LaFollette Tn and it would have to be picked up or could deliver as close as...

Alright,I ended up needing cash and sold all my 360 stuff except for edelbrock 60779 heads,airgap intake and all my carbs!But now all i have left is 318 blocks!I was gonna stroke a 318 to 390 but my funds are limited!So I want to see if this build will work for 83 d150! 70' 318 bored 40 over...

Ok have decided to part with new rockers for sb 273-360!They are Comp cam Ultra pro magnum roller rockers #1622 and the come with shafts and rockers!They are 1 yr old but never used!Located in LaFollette TN 37766!Will take $450.00 shipped for them!Here is pics!Only money orders!Just PM me!Thanks

Ok this item was suppose to be sold but didnt go thru and I am posting back up! It is Comp Cam XS274 cam and lifter kit with 274/280 adv,236/242@50,502/511 lift,.016/.018 valve lash,and 2200-6200 rpm range with 106/110 centerline!Was installed but never ran! I will take $200.00 shipped and It is...

1.Truck 360 oil pan painted black and in good condition!Take $40.00! 2.Brand new summit racing 360 4qt oil pan for car,never used and take $60.00! 3.Mopar Performance 360 Balancer new,never used take $75.00! 4.MT valver covers that is painted black and good condition!Take $70.00! That...

Ok I have a freshly machined '71 360 block been bored 30 over and new cam bearings and freeze plugs installed,painted black!Take $400.00 for it!Also 360 crank cut 20/20,will take $125.00!Scat Hbeam rods and Keith Black 107 pistons with rings,will take $400.00 as pistons are on rods!And Comp cams...

Hey Guys!Just figured I would let you know I am new owner 1974 duster!Im pretty excited so now I have project and I am going to put my eddy headed 360 in it and leave 318 in my 83 d150!I will send pics of resto in future!Thanks and I would have took more pics but it was in barn but go back and...

[SOLD]I have some more sb parts for sale that i aint going to use!1.Comp Cam and lifter kit #cl20-230-4 which is a solid flat tappet!Specs is 274/280 adv,236/242@50,502/511 lift with 2200-6400 rpm range!Installed but never ran.Will take $200.00! 2.Also Comp Cam magnum pushrods that measure...

Well went to machine shop and Him and I came up with new plan!Now it has .030 over kb107 pistons zerodecked,Eddy rpm 60779 heads,AirGap,Comp Ultra Pro Magnum roller rockers!The cam is XS274 cam with 502/511 lift and 236/242 @50 and holley 650dp!Compression will be 10.5-10.8!Heads will be flowed...

I have brand new set of Hyd Lunati lifters never used!Part number 71977 and is located In LaFollette TN 37766!Will take $70.00+shipping!Thanks!Sold

Hello!I have a few stuff for sale that I decided not to use so here it is! 1.Lunati Voodoo 60404 cam brand new still in box,234 intake@50 242 exhaust@50 with 513/533 lift but no lifters=$130.00 plus shipping! 2.PRW Hi-volume water pump never used=$80.00 plus shipping! 3.Comp Cams Ultra Pro...

Hello,I am building a 360 for my 83 d150 and need cam advise.360 has been bored 30 over with KB107 pistons,360 cast heads which has 9.8 comp and new mp heavy duty rockers.727 has been rebuilt and i want to use 2500 or 3000 stall with 3.91 8.75 rear.I looking at mp 484 or voodoo 494/513 60403...

I am in need of mopar 8.75 489 case that is empty and put new stuff in!Would pay shipping as I am in TN 37766!Thanks