Search results for query: *

904 slip yoke ( 26 spline) with new u joint . Bought this from a member about 4 years ago for a project but never used it. Houston ,Texas

I bought 2 of these '64-'65 273 intakes in a package deal when I was building a 273 several years ago.. The bolt holes have been enlarged to fit the later model 273. Has some wear but mating surfaces are good. I test fit it on the '65 273 I was building and used washers on the bolts, with no...

Off a '65 Dart parts car I bought several years ago. No dents just accent color faded/gone . You only pay shipping. Cleaning out my Dart stuff. In Houston, Texas. ( Stated here that these are actually off a Plymouth '67-'69 )

Was there a certain year they started stamping build date on the passenger side of the A833? The one I have does not , just the raised forged numbers.

I have an early A Hurst Comp. Plus shifter I need a reverse shift arm. Everything else is in pretty good shape, but the reverse arm has been repaired. I would rather replace it. Looked at Brewers and online, no luck. Any help appreciated.

Looking for a 9.5 inch flywheel for my 1965 270 Dart project. 273/A833

Looking for early A body('65 Dart) shift levers and rods for Hurst factory 4 speed shifter. Thanks, Chris.

Replacement needed. 1965 Dart 904 park cable retaining spring that is in the trans. park cable housing. Not sure if they are still making this part. Maybe someone has a one . Thanks.

When I purchased my '65 Dart Gt HP273 several years ago, the park cable was inoperable. Finally getting around to replacing the old broken cable and discovered that the retaining spring in the park housing was bad and will not hold the cable in place. Any help on where I might find a...

Still seeking the chip guard wheel molding for passenger rear wheel opening. Thanks.

Working on a 2 door '65 dart 270. What are the options available for floor pans replacement? Can't seem to locate a full pan. Thanks.

I shopped around for the seat covers for a 1965 Dart GT buckets. thepartsplaceinc had the best price at $415/delivered. including the carpeted back panels. I had heard stories of long delivery times so I emailed them about the delivery time. They responded quickly with an estimate of 2 weeks...

I have an Eddie D4B intake I want to replace for my stock cast iron intake. I have the stock chrome charger air cleaner and the Eddie 1403 (500 cfm) carb. Anyone have this setup? Looks like there may be a hood clearance issue as the intake is higher than the stock. Yes I'm lazy and have not...

Looking for a dust shield shipped to Houston. Thanks, Chris.

Looking for the lower adjusting bracket ( slotted and curved ) for my '65 273. Chris.

As stated, looking for a good one for my 1966 dart project. Houston,Texas

Looking for a A833 bellhousing for a '65 Dart 273.In the Houston area would be nice. Working on this little 2 door post.

I have a small block bell and clutch set up out of a 1966 Belvedere 3/tree. Any possibility it will work with an A833 A body 4 speed I want to mate to a HP 273 that is going in a '65 270 Dart that was originally a 3 tree/slant six car.? I will need the floor hump, shifter/linkage, boot, etc...

I wanted a mechanical oil pressure gauge for my '65 Dart but I didn't want it hanging under the dash. Found a 1-1/2 " Bosch set and a nice '65 ash tray( $10). Gauge fit perfectly in the face of ash tray. 1-3/4 " hole saw and voila....now part of the dash. I have the original ash tray if a future...

I added some "Dart Charger 273" badges to my '65 Dart GT. Thanks Ulf for the brass blanks. Had them chrome plated and painted here in Houston.

Long shot I know. Looking for a nice rear passenger Stainless steel wheel well trim. to replace this damaged, miss-matched one. Thanks.

I have an Edelbrock D4B intake I want to use on my '65 Dart GT w/HP273. Using an Eddie 1403 and the Charger air cleaner, it sits up higher than the stock manifold. Has anyone used this combo that could give me some insight? Thanks. Chris.

When I bought my 1967 d100 shorty, the PO had a bunch of parts he included with it. What appears to be a A904 I may use with a 1965 273 I am building. Can someone tell me what it came out of the # pk4348715-8844-0352. Any help appreciated. Yes I'm ware of the crank small snout issue on...

What is the max amp alternator to safely run on my '65 Dart HP GT w/charger 273. Still has factory amp gauge and 5 amp regulated fuel/temp gauges. Stock wiring. Factory ac has been removed and no other added accessories. Found a 75 amp rated chrome unit I was thinking about using. any help...

I was planning on using a 1970 rebuilt truck 727 behind the 1965 273 I just finished, if I end up dropping it in a 1961 D100 shorty. I read a post here recently saying that the early 273 will not take a later model auto trans. Any help here? Chris.

How much difference in HP would be gained by replacing the 8.8 to 10.5 pistons? 8-10%??Been working on a 1965 2 barrel 273. It was a low miles (35K) original motor from a Dart. Rebuilt with original 8.8 pistons,rods. Honed cylinders not bored, crank polished.Heads redone. Added the E4 isky cam...

The '65 273 I am just rebuilt did not have the pulleys's when I bought it. I had a set from a later model 318. The crank holes match up except 1. Is there a 273 specific crank pulley that I need to locate? Any help. Chris.

Looking for the grommets the hold the plug wires on the finned valve covers.Any help appreciated. Chris.

Anybody running a 600 cfm Edelbrock on a stock 273. Wondering if it might be too much. I have a 500 cfm on my '65 dart gt hp 273. Thanks, Chris.

Looking for the correct alt. brackets for a 1965 273 I am building. non-ac.Thanks.