Search results for query: *

Looking for a Flaming River steering joint. Part # FR1715DD. Size is 3/4"-36 spline X 3/4"DD Anyone have one of these sitting on a shelf? Thanks?

What considerations are there in deciding on a splined steering shaft or a DD shaft? Pros, Cons? Tips, Safety? Need to mate up my Flaming River Column and Flaming River manual box. It will be a two joint system. I believe the original setup had the column and box near perfectly inline. I...

Looking for a Flaming River or Ididit dash mount for an 1 3/4" column. I have a 2" mount, but ended up buying an 1 3/4" column afterwards. So, I'm looking to buy one ought right or trade the 2" mount that I have. Thanks, Like this-

Tomorrow I will finally be dropping in the 408 and 904. It has been 20 years since I've done this, so its like the first time. I've searched the forums and read the manual. I'm gonna make a short list of what needs to happen and the specs I came up with along with some pics. I would appreciate...

Original wheel trim removed from my 1969 Dodge Dart. Really nice driver quality. No bends. Finish could be polished to make near perfect. Correct trim for other years. Local pick-up welcome in San Diego. $120 plus ship. Thanks

I have done a lot of disassembly on this car, and made some modifications, but now its time to get the major components installed. This will be my first time re assembling an A body. I know its basic advice, but is it easier to install the manual steering box then the 360? Or should I set the...

Brand new Dorman 620-101 radiator fan. Still in the original box. Purchased 11 months ago, but decided to go with a dual Spal instead. This is the stock replacement for a Taurus. If your interested, you are probably familiar with it. If not, you can find additional info by doing a thread search...

Looking for the bracket that secures the column to the firewall. Its for a '69 Dart. A nice used one would be great. I would consider a new one if anyone knows a place that makes them. Thanks.

I have this Helix tilt column that came with my project. I'm gonna describe what I'm thinking to do for install, but I'm looking for feedback and suggestions; other ways to go, options. I want to make sure that its properly secured and looks clean. The column is a manual floor shift with a 2"...

Wasn't sure it was gonna slide through.

I just picked up a used Husky 60 gallon 7hp belt drive air compressor. I'm sure its not a true 7hp. Its 10.3 scfm @ 90psi. Label shows 240, 15 amp and is currently wired with the 4 prong plug shown below. I plan to use my 240, 30 amp dryer outlet, but the outlet is a 3 prong shown at bottom...

Looking for some PST 1964-76 Mopar A Body G-MAX® Tubular Upper Control Arms. New or used, but in real good condition. Thanks

Dillinger tubular lower control arms for coil-over setup. $290 obo -plus ship. Includes manufacturer supplied hardware. Used for mock-up. The tubing is 1 1/8" and 120. "All of the tubing is thick wall DOM tubing that is 100% tig welded and Sleeves and Heims are Chromoly." Let me know...

Has anybody used Marshall gauges? Familiar with quality, etc..? They are in Orange County, CA I believe. Thanks,

Saw this while browsing Craig's. Real nice Dart. Thought some of you might be interested. http://newjersey.craigslist.org/cto/4497614605.html http://www.ebay.com/itm/141302111524

I found a guy selling an all new exhaust system near Philadelphia. He isn't willing to separate or ship, but we have discussed a price and he has the headers I have been looking for. If your interested in the following and would be willing to pick up all and ship the boxed headers my way, please...

Dillinger tubular lower arms for coil-over setup and upper shock mounts. $390 plus ship. Includes manufacturer supplied hardware. Picked these up recently from another member in a package deal. Keeping the parts I was after and selling the ones I can't use. I was told these were only used...

Dillinger adjustable tubular upper control arms w/ball joints. SOLD Dillinger tubular lower arms for coil-over setup. $350 plus ship. Dillinger upper shock mounts. $60 plus ship. Includes manufacturer supplied hardware. Picked these up recently from another member in a package deal. Keeping the...

Looking for a 4 bolt to 2 bolt aluminum master cylinder adapter. Putting a Wilwood master on a 69 Dart. I know I can get them new, but thought I would see if someone has one lying around first. Something like the one pictured. Drilled where it attaches to fire wall, not studded. Studs are...

Has anyone used this adapter from Doctor Diff for installing a dual reservoir aluminum Wilwood master cylinder? I emailed them and they said it depends on the diameter of the master cylinder where it passes through the adapter. They said their center bore in the adapter is 1.45". I put the...

Looking for this guy- New or like new. Thanks

I have a semi-custom Be Cool radiator that is notched so that it sits down between the frame rails, but is wider above the rails. The core is 24"w x 18"H. I found a good price on a SPAL 30102052 11’’ Dual Fan, pictured below. It is just over 23 1/2" W x a little over 16" tall. It's a puller...

Looking for a pair of TTI 1 5/8 - 1 3/4 step headers for 67-76 A-body sb. New or good used. Heat treated and polished preferred, but will consider unpolished. Please let me know if you have something available or if you see something floating around. Any help appreciated. Thanks.

So, they fired it up and it hit 100psi at 3k. Builder, not original builder and did not assemble the bottom end, said we can pull it off and start by looking at the pump. Or, since we have it here, put in thinner oil and see if it holds steady or climbs very little up to 5k. I'm not there at the...

What is the material on the end of some exterior trim screws? Like the screws that attach front and rear glass clips? I would like to buy the material to apply on other fasteners, if available. Thanks,

So, when I bought my project it came with a lot of parts and goodies. So far everything has been as expected. Good stuff. I'm just starting to learn more about all those things that happen behind the motor. I'm not well versed on transmissions, converters and rear ends, etc. I'm trying to learn...

Headed to the Engine Dyno on Monday or Tuesday. Just thought it would be fun to see what you guys expect out of this Stroker. The motor came fresh and never fired with my '69 Dart. It was built 3 years before I got it and although I talked to the original builder and had him send over the...

We all know some things are discount exempt over there, but plenty of things are good to go with 30% off today. Just thought I would toss it out there.

I recently moved my '69 Dart project indoors. The space is tight and I planned to cover the car to help prevent scratches, etc.. I purchased some of those cheap moving blankets from HF. They are made with polypropylene front and back with cotton in between. Should I be concerned about any...

'68 DART Headlight Bezel. My left for your right or $70. I bought a couple sets of grilles and bezels. Of course, out of four bezels, both driver side where straight and both passenger side were a bit out of shape. I am looking to trade this very straight driver side bezel for a very straight...