Search results for query: *

So I have a 383 with radiator from a 70 newport in my 69 dart it's a 22" no shroud will a 75 dart 318 shroud fit I'm sure it's a 22" also. Just wondering if it will lign up in the correct place I'm assuming yes

So I got my 383 original 2bbl with .484 purple cam 750 holley had heads done with new springs and headers. so a friend of mine said you just rotate the distributer to the spot were it runs best... my question is I know there's more to it and have been reading about it but wonder is ther no...

Mines been disassembled so idk what I need. I have the clips that hold the bows and the bows and the front and rear window trim but where the headliner glues to the pinch weld around the doors do I need these black clips to hold it in place then the weather stripping covers up the clips or is...

My rear windows are missing the rollers that ride on the tracks. Not the plastic rollers the whole assembly. And from what I have read the rears track is different then the front. So my question is what cars if any are interchangeable

On the rear tracks on both front and pass side there is a part that has rollers that ride up and down the track my car is missing both sides. Looks like they connect to a small ball. Anyone have any?

keeps leaking oil onto the headers. Thought it was coming from valve covers so replaced drivers size 3 times now. Still leaking just as bad. Now I'm wondering could it be oil pump gasket if I run my finger under valvr cover I get a little oil but no drips and there's a lot of oil all over...

69 dart My first question is I got 3 wires hanging down i know 2 are for the brake switch which I don't have yet but if I jump them only passenger brake light works? What the 3rd on for or where does it go.. Next is the other pick with a wire with a piggy back on it?

I've tried rubber coated cork and cork with rtv on them and the drivers just drips

my 69 dart has no rear quarter glass track wheel assembly. Not just the wheels all i have is the ball. Does anyone have one or know who makes them looked all over online

got a 69 dart 3 prong nss harness and a 727 with 1 wire nss from 70 Newport. I have read conflicting post on Google where some say you can put a 3 wire nss in trans and its fine but others say it won't work. Can I do that or what other options are there? I could wire the middle wire to it and it...

so when I google 69 dart 727 8 3/4 I get 47.81" for length but if I bottom out yoke I have to pull it out an inch and a half to reach that length... and are all slip yokes the same length because I getting a new one of those too. I also got the measurement from output shaft to center of rear u...

For 69 dart 727 8-3/4 I believe they are 47.8" long center of ujoint

I believe the calipers were from a 78 volare. They are a single piston caliper. What model master cylinder should I get it's a manual brake car. From what I have read 15/16" bore gives more stopping power?

20yrs ago I got my 69 dart I got what I believe is disk brakes off a 76 volare or similar they are a single piston caliper. I'm tryn to get it going after all these yrs. Bought a disk brake master 20 yrs ago it's been dry the whole time. have my brass drum drum distribution block. all new...

So I noticed my carb is dripping out the passenger side verti I have a stock lower end 383 with .484 cam. I don't know anything about carburetors so do I have a stuck float. I read somewhere online about not having enough vacuum that they will not stay one the idle port or whatever you call it I...

Years ago I took front disk's from a doner car for my 69 dart it's been sitting for 20yrs and I was young and don't remember what car they cam off of was hoping someone could help so I can order new ones... my dad said he thought they were off of a volare?78ish... tried looking up numbers off of...

I got a 383 I'm putting in my 69 dart but want to know some opinions should I cool the 727 from the radiator or should I get a trans cooler. It came out of a 70 newport and I'm not sure but belive it originally had a trans cooler because the lines go in front of the oil pan and face pass inner...

They look good but not sure if they are reupholstered

Anyone have a good way to get my telescoping steering column to come back out all the way or do I have to take it apart. It's really tight

Was putting in my summit exhaust and the mufflers arnt even with each other then looked in my 68 dart service manual and the pic looks like they arnt even? Are they not supposed to be? Should I make them even?

I got a new set of 440 source springs and put on my 906's I know there have bad reviews but got a good deal. Just figured I ask so I emailed 440 source and they said they wont work on my heads... they fit in the seats fine.. what would make them not work? Just don't want to start my 383 up and...

I'm try to figure out what the box is on my vacuum advance do I need plug somthing into it? Picture is not my distributor just a similar one

Water pump/ housing-383-$20+ship 2 fans one not sure what from-make offer+ship /6 kick down rod $10+ship Pulleys -4 groove crank from 383 -single groove water pump from 383 -single groove waterpump from /6? 2bbl 383 breather- make offer+ship(not pictured) 2 blue sun visors with mirror...

Do throttle cables differ in length between /6 and bb or body size

Anyone use schumacher headers and summit exhaust on a dart should I buy schumacher ball flanges do they fit right up to exhaust? Or are they not worth the money

Looking to spend $20 or whole set of single groove crank and alternator. Thanks

Will the break in on a new cam ruin my new headers they have a chrome finish

Came out of a running newport 15 years ago with no leaks but no garrantee

In need of Nice used damper with shipping to 50456? I chipped mine

Got a pair of 906s i guess the exhaust valves have external seals. I bought a felpro gasket set and it comes with new valve seals. Can I just pull old seals out and tap in the new or do I need machine work done to them for all internal seals.