Search results for query: *

Hey FABO members in NorCal, I'm looking for a good hood for my 72 Duster. I picked one up at a local PnP a few years ago and when I started to strip it down I hit about a half gallon of bondo across the nose... :( Would prefer a decent bondo/rust free stock hood but would also consider a...

Hey FABO members in NorCal, I'm looking for a good hood for my 72 Duster. I picked one up at a local PnP a few years ago and when I started to strip it down I hit about a half gallon of bondo across the nose... :( Would prefer a decent bondo/rust free stock hood but would also consider a...

DART / Just curious, prices are modest and it looks like they have tons of inventory but this site just sucks... unorganized, bad pictures, etc. Wouldn't mind getting a bolt on hood with dual scoop if I only knew what the quality of their product was.... And no, I don't want to be a guinea pig...

What make and model of vehicle that can readily be found in most Pick N Pull yards are good donors for three point retractable seatbelts with little modifications? Thinking I'll have a few days to go do some yard hopping over the Holidays and Seat belts are on my list of items to look out for...

Quick question, and hopefully not too dumb of a question... My 72 Duster was purchased as a shell pretty much. One of the PO's had already started the BackHalf on it when I took it over. I'm really just going for a nice street rod that can be driven around town to events and shows and may...

out doing a little Christmas shopping and couldn't resist getting my own stocking stuffers.

Hi all, I have a console out of a 67-69 Cuda that I'm planning on modifying for my Duster. The console only has the base, the forward top plate and the rear hinged plate, no internals for shifter or gear indicator. I'm planning on installing the B&M Hammer shifter and was wanting to know if...

I've been able to get most all dimensions I need for making my own console brackets with the exception of the heights of the rear and forward brackets. Can someone measure and get me the dimensions for "A" and "B" in the posted picture? Any info is appreciated, Thanks!

I'm looking for some resources on aftermarket sidemarker assemblies (front and rear) for a 72 and up Duster. I can find lenses online but having a hard time finding the entire assembly (frame, lense holder, plug). I heard or read somewhere a while back that the same sidemarkers were used on...

Hello FABO, Just curious if anyone has a good package tray cover laying around that they might be willing to trace out on some butcher paper or something similar and send it to me? It's a 72 Duster and had no interior from the headliner and down when I got it. I'll be fabricating new panels for...

The PO of my 72 duster had started the back half conversion on the car along with installing the tubs. The tubs were about 75% installed (Steel tubs) and I'm slowly working through the process of closing up all the sheet metal around them. They didn't do a great job of trimming up the outside...

I've got a 72 Duster that I'm putting back together as a nice driver... I just picked up a really nice grill off of a 70 Valiant that's complete with all inner and outer trim, headlight bezels, all tabs and mounting hardware for a great deal at a PicknPull of all places. It needs a good...

Hi all, 1972 Duster After doing a lot of research here and elsewhere, I do believe I have the wrong switch for my wiper motor. Looks like I have the variable speed wiper motor (picture attached) and possibly a 2 speed switch (also attached). Numbers on the switch are 3488839 - 23199. The...

Looking for a Hood latch striker for a 72 duster. shipped to NorCal 95991

So, I been working on my engine harness, the car is a 72 Duster but the harness is out of a 71 340 Duster, I didn't have any harnesses except the under dash when I got the car. I'm going through the harness and pulling out some really bad splices and brittle wires (bulkhead connector is good)...

Well I was riding a high and smiling from ear to ear all day after getting my motor dropped into my Duster this weekend (see my build thread on my signature). That is until I was on my way home from work. Stopped at a red light at a four way intersection, about 3 seconds after a complete stop I...

Hi all, Since my car (1972 Duster/Standard Gauge Cluster) had no interior parts other than the dash frame and the under dash wiring when I got it, as I'm collecting parts and putting it back together I've had to do a bit of research and digging around to make sure I have everything...

Hey FABO I got these interior plastic pieces off a 72 Duster I found at a PicknPull. I know, I was surprised, I pulled everything of her I could carry! Anyway, I want to dye these black, as I was giving them a good scrubbing with a green pad and some mild detergent I noticed that these seem like...

I'm getting to the point where I want to start on cleaning up and refurbishing my tail light assemblies. Before I start tearing them apart I was hoping I could get some advice on anything to look out for. What is the best way for removing the original gaskets around the outer assembly? Looks...

Ok guys, pulled my steering box off, got the pitman arm off and need to replace this seal... What's the best way without any special tools to remove the seal? Manual Steering 72 Duster.

Spotted this Duster last weekend at Mopar Day in the Park, Sacramento. I never got the chance to meet up with the owner to ask some questions. Could be a FABO member? Question is... Where is that grill from? Never saw one like it on a duster, is it aftermarket, custom build, how can I get one?

Anyone headed to Rancho Cordova tomorrow 6/27/15? Showing your car? Post a description so those of us attending can find and meet you... Wish my Duster was anywhere close to being ready, it wouldn't even pass for "Under Construction" Category yet.

Anyone have a source for getting the clips that hold the trim on for the vinyl top on a 72 duster? This would be the 3/4 top... The roof has the studs on it and I now have the trim but it looks like there are some clips (plastic?) that go on the studs that holds the trim in place... Any...

Ok, this might be a dumb question... But here goes. How does the deck lid on a 72 Duster attach to the deck hinges? I have an original deck lid for the car but had to source the hinges from a 71... Now the deck has the opening where the hinge slides into it and there are two holes for the hinge...

Anyone in NorCal know someone looking for a pair of Centerlines, 5x4.75 pattern? Brand new never mounted, just dusty from being in storage. Got them listed on CL for $200 OBO. Will trade for stuff needed for my build. Looking for a decent set of bumpers for my 72 Duster, driver quality or...

My 72 Duster was a /6 car with a 3 speed on the column... I'm picking up a 318 mated to a 727 that's in a 69 Dart currently. Question is: Will my stock Transmission Crossmember work or will I need to pick up a different one? I did a bit of research across the interwebs and the opinions and...

Was wondering if anyone has a set of Shumacher slant 6 to 318 engine mount adapters laying around they might want to let go of for a reasonable price? Shipping to Northern California 95991. Thanks! Jerry

Hi FABO I was wondering if anyone has used these seats or something similar? I'm just about to pull the trigger on these today. My car's interior is completely stripped and I'm having to do a lot of metal work to tie in the rear tubs to the sub frame connectors and the trans tunnel so now...

Hi FABO, I'm at a point in my rebuild where I'm going to need to pull the windshield (and pretty soon the rear glass) out. Need to remove the dash and start on the body work. I take it when putting glass back in that new seals are a must and re-using one isn't in my best interest... With...

FABO Family, Got a quick question. These are the style wheel covers that were on my 72 Duster when I got it.14" wheels... Doing research it looks like these were on Cudas and Roadrunners.. were they on multiple models and multi years? Anyone know?