Search results for query: *

Hello I have 3 a833 4 speeds 1 a body and 2 b body. The a b body tranny has a broken ear but one of the b body housings would fix it this are unknown condition inside they all rotate they have been sitting in the back of the garage for as long as I can remember I'm asking 800$ for all 3. I'm...

Hello I have a set of 340 X heads for sale they came off a running engine that was upgraded to aluminum heads I was told they have stronger valve springs and a very nice port and polish job they are dirty but should clean up and drop right on your engine. One valve cover bolt hole has a...

Hello folks. I have a 72 dart for sale original 318 auto car very good sheet metal no rust has some dents and dings but make a nice driver. Has a 318 with j heads and a mild cam Eddy intake and carb. Runs great sounds mean 727 tranny shifts good has brand new aluminim radiator has a narrowed...

These were folded up in the trunk of a 72 dart I recently purchased but they are definitely not 72 dart. Maybe 69? I don't know but I don't need them if you need them and they fit your car. They are free to swing by and pick up. I am in Macon Georgia

hello friends. I'm looking for a 70--72 dart hood not to far from Macon Georgia aftermarket or stock let me know what you have thank you

Hello friends. I recently picked up a very nice set of 340 x heads that have been very nicely ported. I have a low mile 360 out of a 78 d200 I'd like to slap together and get rid of the smog heads my bottem end is in great shape and no need to rebuild. Will the x heads work well on...

Hello. I just bought a 65 dart wagon in dire need of front and rear right hand floor pans. Does anybody make these? Iv looked with no luck on a full side Anybody have any from a parts car? Thanks. Gary

Lhello selling my 75 duster i dont want to sell it but im leaving for fairbanks Alaska for 6 mouths and i cant take the car with me first off the car has no title but it is regestured in my name and i will wright you a bill of sale the car is a 75 but i have a complete relly nive 73 grill for...

heres a list of what im selling im sorry i dont have pics to post BUT if you text me i can send them to your phone i have 72-74 e body buckit seats white with tracks 500$ sb alum bellhousing 3 or 4 speed orange in color 100$ 318-340 ram racing 10 inch flywheel brand new150 $ sb mopar...

I have some how lost my drive shaft and cant find another one. Its a 73 duster with a 3 speed floor shift and slant 6 rear end. Is their anouther car i can get the drive shaft out of? Will the drive shaft from a slant 6 auto a body work???

i need pics of 3 speed in a a body i cant for the life of me figer out y my shifter links are not lining up please help the cross member is right in the way

Ok im swapping my slant 6 3 speed duster to a 360.3speed. I have my moter and tranny in and i just now went to put all my clutch links in and the slant 6 z bar is to long. Can i cut it down? If so how much do i cut it????? Please help i ready to drive my car again

http://www.viaumotorsports.com/Viau_Motorsports/Completed_Cars/Pages/1972_Dodge_Demon.html#1. This is one cool demon. Does anybody know who made the wheels and size and tire size?? I love them

hey guys im swapping my slant 6 duster to a 318 4 speed and have a 360 flywheel its bolts up fine but will it work ok on the 318???

hello im selling my 74 dodge dart 2 door se slant 6 auto buckit seats ps factory air car but air is gone. its a trun key car runs great i drive it everyday, has bondo in the roof and qourterpanels needs body work but you can drive it as you work on it i would trust it anywere. only problem is...

Hello i need some help i have a 74 dart with small bolt pattern and drums up front i want to swap it to large bolt patteren disk with junk yard parts my local pull apart has a few diplamats and cars like that with disk. Well this swap work without any fabracation? If so what all do i have to...

well latley i have not ben posting near as much as i used to due to working so much out of town but heres what iv ben doing with my weekend my 2 cars, i just bought the dart yesterday to fix up to resale runs great and the duster iv had about 6 months now and its a keeper it is my daily driver...

selling a set of centerline wheels front look like 15x3,s rears are 15x8s they came off my duster fit just fine with no scraps or rubs o and they are large bolt patteren the front tires are no good and the rear tires have lots of tread left but a little dry rotted i am in king nc these...

hello has anybody ever replaced the vinal top on their car? how hard is it and a quick how to would be great thanks Gary

hello every body its great to be back, i have not ben on here in a long time i geuse bc i havnt had a A body in a wile, i have ben fixing up a 65 polara latly as a 60s Kustom, its a daily driver now,/tank lol, any ways yesterday i was at the local pullapart picking up a small item and on my way...

hey guys i havnt ben on here in a wile but i just found 65 dodge polara thats ben sitting 6 years i got a good deal on it broght it home cleaned it up and cant beleave how clean the car was under all the dirt and dust, it was a 1 owner car with 91k miles, solad as a rock, 383 car,. i was told...

well iv decided iv ben out of this mopar game for to long and i regret to say this but i dont have a single mopar to my name and im now driving a 92 honda civic :( i want me another duster to work on dont matter if its just a shell i dont have alot of money so i cant be picky but if u have...

http://winstonsalem.craigslist.org/cto/1433109312.html mine need to trade for something running

http://winstonsalem.craigslist.org/mcy/1315785127.html its mine let me no what u think

im selling my 79 aspen wagon it runs like new and looks like new only thing wrong with it and the front fender has ran into somethen BUT its very fixable and i have every thing to fix it,. i drive it everywere and to all the local cruise ins and it runs great and stop great id trst it anywere...

http://winstonsalem.craigslist.org/cto/1167896826.html

my good freind trever made a vid of me nd alot of my freinds at the skate park. just thot i would share. im the one with the mohawk nailing a bonless 180 off the huba. http://www.youtube.com/watch?v=-uLMXfgJW7g

ok so im taking my 318 and swapping it out for a mildly built 340 with a 512 lift cam can i still use the stock 318 904 converter and get by on the street with out any issieus?

yeup today was my last day of school got my daploma and i am now a certafied nascar chassis fabracater. i hope i can put my new found skill to good use and land me a good job hopefully with a drag car team heres some pics of some cars we built and worked on wile i was in school todays a big...

need a 318 wide block 4 barrel intake let me no what u have and if this even exest