Search results for query: *

I have been reading some posts here about exhaust manifolds. I just acquired a 69 Barracuda with a 74 440. My garage is not that well equipped but the shoes in the steering coupler were toast and to get at it I had to cut the headers out, they were not in great shape anyway. I bought some cheap...

I am looking for the proper 69 Barracuda pass side fender fish. I see a few on ebay but not listed properly. I know there are a few different versions...could someone please post a pic of the correct one. Thanks AL

Pulled the sender out of my tank today and wired it to my gauge to double check the sweep..it was not my sender {ohms are right where they should be} So when I fill the tank, gauge reads full after the float drops to around 3/4 the gauge goes right to empty. I have heard the gauges can be...

I have a 71 Twister with a built 440. The Twisters didn't come with the fresh air opening under scoops..well I installed them last weekend now my hood will not close because the hood donut hits the snorkel on the passenger side. I love the look of the air cleaner and my question is...has anyone...

After many many.. many years of owning B bodies I am back into an A. I bought a sweet little Duster Twister..440 4 gear and looking to get back into the swing of things here...missed the A body board

1970 DODGE CORONET 500 UP FOR TRADE OR WILL SELL OUTRIGHT. THE GLASS AND CHROME ARE ALL GOOD AS WELL AS THE INTERIOR. PAINT SHOWS VERY WELL WITH A FEW STONE CHIPS HAS SOME METAL FLAKE WHICH REALLY MAKES IT STAND OUT IN THE SUN. THE ENGINE IS A 68 383 PAIRED TO A 727 TRANS BOTH WORK VERY WELL...

It is that time of year again and looking for another car to play with over the winter. THIS IS A REAL 1970 DODGE CORONET 500 UP FOR TRADE OR WILL SELL OUTRIGHT. THE GLASS AND CHROME ARE ALL GOOD AS WELL AS THE INTERIOR. PAINT SHOWS VERY WELL WITH A FEW STONE CHIPS HAS SOME METAL FLAKE WHICH...

* I was devastated to find out my wife was having an affair but, by turning to religion, I was soon able to come to terms with the whole thing. I converted to Islam, and we're stoning her in the morning. * The wife suggested I get myself one of those ***** enlargers, so I did. She's 25, and...

I am looking to buy a QUICK FUEL Slayer carb and was wondering if anyone is using one of these, and will it accept the Holley Throttle Lever Extension? Thanks Al

I have my VERY near new Aluminum rims for sale, not even used one season. Still have the boxes they came in. Removed from my 65 Coronet. All four are 15x7 with a 3 3/4 back space. They are the large bolt pattern 4 1/2. Have all the center caps as well. The rims have no marks at all, they also...

I have a Hurst V matic 2 shifter that I need to alter a tad. I need to know if the trigger handle can be removed and still have the shifter operate properly. I need to cut a slot out of the handle and bend it forward so I does not interfer with the console when pulled back into first gear. Thanks AL

I was just looking at my fender tags on my 73 Charger. I always assumed this but to be sure I will ask the crowd. One of my tags has a H in the bottom left corner and a F in the right corner...have no clue. But top right corner has a SO.....can I assume that meant special order? Thanks Al

Found this ad..if nothing else good for a laugh....how did this guy get his Apprasial ticket..LOL For the money you would think he would get a horn button for it... Al http://toronto.kijiji.ca/c-cars-vehicles-classic-cars-1974-Plymouth-Road-Runner-GTX-Coupe-W0QQAdIdZ405166413

I was under my 73 today and I noticed my 8 3/4 center does not have any casting numbers on it..no 741, 742, or 489...???? I thought they all came with some sort of castings. Whats the deal? Thanks AL

I needed a 16" stock rim for my 07 Nitro. First thing, I call a local dealership for a price. I was knocked back on my *** when he told me the price. 16" stock rim...no chrome..no tp sensor...$450 plus tax...come on guys really. I think if they made the prices a bit better they might be doing...

Well first time for everything. I broke the bolt off inside the head for the alternator. Nothing to weld another bolt to and I tried to back it out with a punch..no luck. I guess I will buy an easyout but I need to remove the top alternator bracket in order to drill it. I am not sure if those...

I have been trying to figure out a problem with my electrical system and thanks to all that have given me tips. I pulled my alt out last night to look at the brushes and found a stick on label that reads the voltage at a certain rpm. I was unsure of what capacity I had so this post is to...

The car was running great until I got stuck in some traffic. The temp gauge went up to 230 and I noticed my volt gauge dropped to 12 volts, even when I reved the engine the gauge stayed at 12 volts. The only thing running was my electric fan. After a bit of time she started charging again 14.5...

I picked a 73 340 Charger last year and have been playing with it. It has a 727. Now it does have a kickdown but will not kickdown no matter what I do to adjust the linkage. I know if it is not adjusted right it will still kickdown either early or late. I am wondering now if it is a manul valve...

I have a 625 Road Demon Jr for sale. I was told the carb was rebuilt by PO. It came on a 73 340 Charger I bought late last year. I drove the car about 100 miles and the car drove well and was quite responsive. I swapped it out for a Holley Street Avenger I had bought, so this one is up for sale...

The carb came and the choke cover was smashed, owner said he would ship a new one..great, that is looked after LOL. I installed it today and torqued it down as per Holley site instructions, 60 to 80 lbs. I got to 50bs and three of the four corners broke. I drilled the holes a size bigger to...

Has anyone had any experiance with Allstate Carburetor, I am looking to get one of the carbs from them, I figure they have been in Biz for 35 years must be doing something right...but being in Canada I have no experiance with them, any advice would be great, thanks. AL

Has anyone used or seen any 68 Hp exhaust manifolds used in a 71-74 B body. I want to ditch my headers but I am not sure if these will fit... Thanks AL

I have a buddy who has some Heddman headers he said I could have as mine are pooched. But he says that they will leak because of the small flanges, they are only 3/16 thick. Has anyone used these, or do all headmans use the thin flanges? He is a mechanic and swears they will leak unless the...

I got a repo tuff wheel and horn button from a buddy. I bought the can an the horn switch, I installed the can, mounted the wheel, installed the horn switch, and the damn horn button will not fit on the switch. It will not go deep enough to fit. I guess the tuff wheel horn switches all all the...

I went to install my Tuff Wheel today and the extention adapter does not fit on. It looks like the knurl on the steering column is a bit bigger, so the adapter will not side on. The both look like 5/8 I am putting this on my 73 Charger...it came from a buddy who bought it for his friends 70...

I put one of these in years ago and had no issues, but I am giving the head a scratch today. The fan I have is a junk yard no name but works great when power is put to it, has a real kick when she starts up. I got one of the Zirgo adjustable temp switches and wired through a 40amp relay as...

I saw a picture of a car that has some sweet looking tires on it. The way the car was shot I can only see one side of the wheel. In solid white lettering it say's DAYTONA on them........I want them....I need them...where the hell do I find them....LOL I have looked the net but come up...

I want a new look for my Charger so I am going to put this out there and see what happends...I will trade straight up for 4 LBP steelie rims perfer 15x6 front and 15x8 for the rear with Good rubber for my Boss rims and rubber {both in excellent shape} The front are 18" and the rears are 20" If...

This is also a great show...loads of cars and really nice grounds that draw over 1000 cars. Free to register loads of goodies LOL http://www.motorfest.ca/index.htm AL