Search results for query: *

I have a new engine Cradle for a big block Mopar. Never used. Probably not worth shipping so anyone in the Dayton-Cincinnati Ohio area can pick it up Located in Middletown, Ohio $20... :)

Built this stand to play with :) The engine , radiator and MSD box will go in my Cuda if I ever get it out of body shop hell. It's totally adjustable for most engines. [/ATTACH]

are the stock pistons in a 1968 440 a flat top or do the have valve reliefs as shown ? Thanks guys

I have 2 fenders, Right and left for a 67 Barracuda. Holes can easily be cut for marker lights for 68 or 69 . The fenders are as straight as any I have seen, drivers fender has no rust or rust repairs. Perfect sheetmetal Passenger fender has a very small spot at the very bottom of fender in...

Anybody been to the ALL Mopar Show&Swap in White Pine Tn. ? Anybody going ? Its this Sat. , June 1st . 2013 I'm thinking about swinging by since I'll be in the area Its run by the Smoky Mountian Mopars and is at the Great Smoky Mountains Expo Center exit 8 off I-81

I'm needing replacement A Pillar trim for my 68 Barracuda fastback . What years and models fit ? And will a 69 dart A pillar trim fit a 1968 Barracuda fastback ? Thanks Donnie

Looking for NOS , re-pops , or excellent used emblems for my 1968 Barracuda . These are the two on the trunk , close to the passenger tail light. I have the originals but they are in need of re-chroming Fish emblem part# is 2840877 Barracuda emblem part# is 2840876 or 2842762 I will also be...

Putting my 68 Barracuda dash back together on the bench, My windshield wiper/washer knob is way to sloppy..... And will fall back off . It looks like I'm missing a small piece that snugs it down on the wiper switch . My grandson had the knob the other day "future motor head :) " and I got it...

After doing some calculations on amp draw on my Cuda , it seems the factory alternator is about 1/3 of what I'm going to need . It's still in the build process and it seems like it has been forever... It's time to get some more things underway.... But here goes.... 505 stroker with 2 13"...

I have the shift kit installed in the valve body , front band adjusted , and welch plug installed. Now I need to install the new spring into the L/R servo The valve body is still on the bench until I get the rear servo spring upgraded . My question is , How do I remove the servo to install the...

While I have my dash on the bench and the Cuda in the shop I decided to upgrade the dash somewhat. The dash it repainted , new top pad , bezel re chromed , gauges cleaned up and needles repainted. I got a new electronic Instrument Voltage Regulator to install . After it arrived I see that looks...

Has anyone installed one of these tanks ? How do you like it ? And has anyone installed one with a in tank electric fuel pump for a carburated engine ? Its getting time for me to do something about my gas tank . I like the idea of a in tank pump , kinda get it out of the way..... It will be in...

Has anyone used the Classic Auto" Perfect fit" kit it their A body? I have a 68 Cuda with a 505 RB engine. It also has fabbed Aluminum valve covers . My concern is how much clearance there will be between the passenger valve cover and the hoses where they come out of the fire wall where the...

Anyone in the know about Classic Auto Air installed in a 68 A body with a 440 ? They have a custom built system for these cars , but it looks like the hoses will hit the valve cover where the hoses come thru the firewall where the heater blower was . My car is a 68 Cuda with a 505 stroker...

I have some Ansen Sprint wheels that I need the inserts for on the back side , they slide into the backside of the wheel to adapt between 4 1/2 & 4 3/4" bolt pattern . Anyone have some old ones laying to sell , I need 3 of them . Willing to buy more if you have a full set to unload Thanks Donnie

Lookin like the Cuda is gonna be awhile and I had to have a Mopar to play with this year....... 37 Dodge truck on a Ford Ranger frame "disc brakes" ;) 440 & 727 tranny Fun & LOUD I would love to find an old dual quad intake for a cool look. I also need to find a radiator that will cool it and...

I need to decide on what way to go with my gas tank on my 68 Cuda fastback. I have the stock tank, but Im leaning to a Hotrod City gas tank , or Rock Valley stainless tank. I'm also considering an in-tank fuel pump for the new tank. I think it would make for a cleaner install. Any suggestions...

I have the cowl from a 67 Cuda that I parted out for sale . I think it fits 67 thru early 70's A body's . Inner structure still attached. I cut it out with a sawzall. There is a small rust hole on passenger side on the vertical surface close to the hood hinge. Pretty easy fix . The rest is...

The heater control switch on my 68 Cuda has a broken plastic pin that the cables attach to . Anybody sell these or have a fix ? Its the small white plastic pins Thanks Donnie

My daughters 2002 Neon died at a traffic light the other day . When We brought it home , I saw that the timing belt was stripped. Im guessing that it will need a valve job also. Dam interference engines. Anyone in the Dayton , Middletown - Cincinnati Ohio area interested in doing some wrenching...

Will soon be installing the headliner , " Will have it done" in my 68 Cuda fastback. What order do the rods go back in ? I found a link for a Dart , but I'm not sure if its the same for my Cuda I believe they are color coded , but I would have to dig them out to verify. Thanks...

ordered mine today Sorry...... wrong ad section............... http://cgi.ebay.com/ebaymotors/65-66-67-68-BARRACUDA-FORMULA-S-FENDER-EMBLEM-/190469102212?pt=Vintage_Car_Truck_Parts_Accessories&hash=item2c58d7da84 Please wait Image not available

Ordered me a set today :) http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190469102212 US $65.95 Please wait Image not available

Im replacing my old 120 MPH speedo with a 150 mph in my 68 Cuda. I would like to have the same mileage on the new one if possible . Is there a link or someone with knowledge on how to do this ? My car is getting closer to being ready to reinstall the dash :) Thanks guys Donnie

I know the dashes were painted with a "suede" textured paint , but has anybody tried the Rustoleum texteured paint ? I sprayed a piece of metal with it today , it looks ok so far but the paints still drying.......... What is everyone else using ? This isn't a restored to factory new car , just...

Getting ready to install my new light weight hood springs on my 68 Cuda :) How tight do I wind them ? Do I just slide them on loosely or try to turn them a 1/2 turn or so more more lift tension ? Looks like a ***** to do that . I got them from a guy on here awhile ago . Fenders , splash shields...

Can someone post pics of a 73-76 A body suspension ? I would like a diagram or pic of the center link/ idler arm & tie rods if possible Thanks Donnie

I found that my dust shields for my Disc brakes are a little to ratty for my Cuda , Im installing 73-76 disk brakes & K member in it . I found these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270645732337&ssPageName=ADME:X:eRTM:MOTORS:1123 Will these fit a 73-76 A body car...

Got my upper dash pad for my 68 Cuda back in June . I opened the box and all looked great then. My dash was still in the car at the time so I couldn't check the fit. Well , I tried to put it on today and its 1/2" short on the down legs on the edges by the doors . It measures the same along...

what size tires are you guys running with a 15'' x 4-1/2'' front rim on the 67-69 Cudas ? I'm converting to a 73+ K member with disk , Car is mini tubbed and I'm now in need of tires for my new rims :) I think the newer K member is a tad wider then the 68