Search results for query: *

I was at that show/race. I can find out quickly what was in the car.

Not to step on anyone's toes, but I am also selling Mopar-themed shirts: www.cafepress.com/sharpiewear There are some cool stylized designs and some full-color as well.

Go team MINI!

Be careful all. My girlfriend lives in Irvine so I'm praying nothing happens.

Good to know he's doing well. I also haven't heard from him since Fall Fling. I was supposed to meet for the picture, but got caught talking to a buddy about his car. Hope everything's alright in your life, Ben.

I just want to say that if you go into Harbor Freight knowing that it won't last forever or have a warranty, you'll be just fine. When I can walk in there and pick out a tool for a dollar, it doesn't matter if it lasts me two uses or ten years, it's already been worth the money.

watcha need?

Russ, that plaid interior was boss!

Well, I know a carb is supposed to have a small sucking sound from the venturis, but mine's loud as a vacuum. In a 625cfm Edelbrock 1405 carb. The choke fixes it while cold (even when the fast idle cam is disengaged, meaning it doesn't open the throttle plates when I apply the choke). And...

Vacuum leak all the time, but it's only really noticeable when cold, unless I engage the choke. Multiple carbs because I've gone through a few. It's an Edelbrock Air Gap single 4bbl intake, but I've tried a Holley that I've rebuilt three times and an Edelbrock that I've rebuilt twice. Both...

Well, I am happy to say I didn't drink myself into a stupor on Friday. I didn't even drink at all. One of my problems with the car is that I can't store it anywhere close. My parents have only half a garage, so the car sits on the street, staring at me. I need to get a car cover for it at...

I frickin' hate my car, its engine, the multiple carburetors I've gone through, and everything that goes along with it. I am more than halfway to selling the piece of sh*t. Yes, I am using "strong language." No, I don't care right now. :angry7:

coil possibly, also make sure it's not running too rich and drowning the plugs. Pull a plug and see if it's wet after you try to start it a bit. Sure sounds like a coil though.

Ramcharger, there are really nice tubular control arms with heim joints available, if you're so inclined :p My old Jeep:

must be a 1999+ grand cherokee? My 4x4 ball joint press was able to press in all of the bushings on my friend's Chevy Nova control arms

Norcal's better :p

this makes more sense, thanks for clearing it up. Even though I now know they aren't his auctions, let's assume they were. He puts all his ebay auctions up, then sends us the link? Why not try to sell them here, instead of having members here bidding against other unknowns for an item that...

Now that someone else brings it up - I think it's a shame that he posts a bunch of stuff on Ebay first without offering it to forum members first. Sounds like a scheme to squeeze a few more dollars from some people. :angry7:

I had dinner at Luigi's on Main last night with the gf and her dad. Good seafood pasta!

I'll be sure to take some pics of it at SEMA.

No, I know he was giving constructive criticism. But I don't think my prices were that out of line. The website itself is about $50/yr, whereas the prices of the prints and such are on there.

sounds like a plan. Is there a layout available from CPW?

Haha! Thanks, Keith. It was a logo for a friend, and that was his request :p

Thanks Will. I think I have about three hours total left on the front and rear, and maybe another 4 hours on the interior left. Been plugging away slowly but surely! Thanks for the compliments. I will reply to your PM later this afternoon. I think I should have an example up there now...

jesus christ, is this going to become a pissing match? First of all, I have better representations of photomanipulations, but the Volare had multiples (you can ask to see them if you don't believe me), so I used those. By the way, the Volare owner wanted a polished mag look to the front wheel...

Alright, I thought about it, and I significantly lowered my prices. If people want to continue to have it done for free (with no lighting changes, less precise chopping, etc), that's fine. But if they want something that they can have printed out and such, they can think about my services.

Okay, I should change the title!

will be soon :)

What browser are you using?

Click on the icons in the gallery? Prices are on there. If you want a photomanipulation, it'd be about $75 if you weren't a FABO member. FABO discounts will apply (at least 10%, more will depend how much you'd like done)