Search results for query: *

I have a 74 duster that is having serious electrical problems. We have pulled out the entire under the dash harness and we need to completely by pass the seat belt interlock system because the control box is completely burned out. Also the care is having a MAJOR short somewhere and while driving...

Hey guys, I have a serious starting problem with my 74 318 duster. Every time I start my duster I turn the key over and it won’t fire until I let go of the key and it returns to the run position. So every time it starts my Carb gets flooded and the car starts horribly. Open to any suggestions...

Hey guys, I need some help. I have a 74 318 plymouth duster with a 904 automatic tranny. I wanna put in a 4 speed. What tranny could i put in that is a 4 speed that would require little modification and where could i get it?

I have a 1974 duster with a 318 that used to have 245s in the rear and I switched them to 355s witha 3 speed tranny. So when I drive the freeway naturally the engine revs high. I live in so cal so it can get pretty hot and my car runs up to about 210. Whats a temputure that I need to be worried...

Guys, My Cowl is leaking so bad. We poored water in it and it just poored into my interior. What seal is bad how to i get to it and where can i get a new one. Thanks

Does any one have any idea where i can get a replacement bulk head for a 74 duster mine got fried and now my car starts really bad and doesnt get all 12 v to the starter. Thanks

I just changed the gears in my rear diff and my spedo cable is way off. I know that you can buy new gears with different teeth can someone please tell me how many teeth I need for the cable to be most accurate. I have a 1974 Plymouth Duster 318 engine 904 trans 3 speed and a new 8 3/4 rear...

Guys, My dad and I our swapping out a 8 1/4 to 8 3/4 rear diff and I was wonder is it going to line up the same with the leaf springs and the drive shaft what is your guys thoughts.

Hey guys, I need some advice one of my parts guys is going to sell me a 8 3/4 rear end 3:23 gears complete out of a 69 road runner redbuit axles basically everything new all new seals and bearings for 750 thoughts/comments Thanks

Hey Guys, I wanted to take some suggestions from people about putting aluminum heads on and changing my Gears in the rear end. I have a 318 rebuilt motor with flat tappet cam and edelbrock manifold and perfermance carb. I was thinking about getting the Performance RPM heads. Also I have 2 45...

I have a 74 duster 318 with a edelbrock carb and intake. Whenever I drive up this steep hill by my house near the top it back fires really bad. Its only this one hill that it does it. It never does it on any other hill and when I get on it. Althouth this hill is steep this problem worries me. My...

Does any one know exactly how much freon my 1974 318 plymouth duster stock ac takes? Thanks

My speedo cable is acting weird. From 0 to 10 its really bouncing. Then it straightens out untill about 80. Some times and only sometimes when I am driving on the freeway when it hits 80 it bounces around all over the place and makes a ringing noise. I just lubed it recently so I know thats not...

I recently had a big problem with my 74 duster. My problem was the car would start for half a second and die instantly. If I held the key over however it would still run. My Dad and I looked at it and after messing with some wires it started up and ran good for a little over a week. Then I was...

Hey guys, My dad and I want to install a Viper 5901 Alarm in my 74 duster. So I was wondering if any one has any information on how to install this alarm such as a wiring diagram and what not. Also if any one has any suggestions on other types of alarms that work good I am all ear however I...

Hey guys, My speedometer cable on my 74 duster bounces really bad from 10 to 20 and then like drops after 80 to 120 so I was wondering first off does it need to be lube and how do I do that Thanks

Hey guys, I have a 74 duster i have all the emblems but were can i the clips to hold them in. They dont use glue and they have no threads on them. does any one know were i can get them. The emblem holes are like 3/8 inch. Thanks Brian

Hey guys I just finished my 74 duster and I bought some of the orginal decals such as the air cleaner instructions, the cooling system warning, the battery warning, the jack instructions, the caution jack, the tire pressure. I dont want to put them on yet untill i know were exactly they go. Can...

What size rims can i fit on my stock 74 duster 318? I wanna go as big as possible with out doing any grinding. Also my car is b7 blue do you guys think that torq thrust type Ms would look good on it Thakns Brian

Hey guys, I need some opions on what type of oil to run in my car. Me and my dad are finshing up on my 1974 duster 318 that we did a total bumber to bumber on and were going to break the engine in with delo oil but after that what do you guys think on oil. What type of oil you guys run in your...

Some one please help me. me and my dad are trying to put bucket seats in my 74 duster. we have the right seats but we cant figure out how they go because i took the tracks apart to powder coat them. and we tryed to put them back together but the passenger side keeps hitting the drive shaft...

Does any one know where i can get seat track bushings for a 74 duster bucket seat tracks Thanks Brian

Were i can get a engine wiring harness for a 1974 318 plymouth duster or something that will work for a fair price Thanks Brian