Search results for query: *

I have a leak. I know that this comes from the shifter but I do not know what to call it to find the necessary gasket.

So a while back I installed new seals and it looks like I screwed up the one on the passenger side as it left an wonderful oil and brake dust mess. So my question is should I drive it in dry or grease it or what?

I have a 65 barracuda 904 trans slant six. The transmission has the slip in "bung" and bolt down retainer. I am wondering if this adapter will work to convert it to a more common screw type speedometer cable. Mine is leaking at this point. If not does anyone know if you can replace the seals on...

Well I did this a couple of weeks ago and I apparently screwed up because I am leaking oil into my Brake drum. Should I drive the seal to the shoulder on a 7 3/4 rear end? I do not have the tool suggested by the service manual so I made one. I used a 2.25 od (seals says 2.3 od) washer and a 8...

I am preparing to replace the rear axle outer bearings. My question is do they NEED to be pressed or will they slide on? Is there any gotchas you guys can suggest I need to watch for.

Okay I just got my rear wheel bearings and hoping to install them but I ordered these. https://www.dragtimes.com/parts/National-Bearings-RWF34R-Rear-Wheel-Bearing_290698308919.html Is the smaller ring my grease seal or do I need a separate grease seal? Looking at it the inside diameter is the...

I was browsing another site that directed to this video it is an amazing explanation of how a differential works. How Differential Gear works (BEST Tutorial) - YouTube

Okay so today I was changing the rear brakes and on the driver side I noticed some very heavy weight oil. I think I found it leaking behind the wheel hub that feeds into the rear end. Is that possible? If so what can I do to stop or fix it? I did check the oil level in the rear end and it was down.

All right so I finally got the engine quite enough in my 65 Barracuda that I can tell the rear end a 7.25in is roaring. My question is what could cause this and is there anything I can do? I have been considering lowering the gears where can I find a place that sells them and what would be ideal...

Ok I am hearing a roaring when I take off from a stop. I have already replaced the front bearings and races both inside and outside. I think it may be coming from the rear end. I replaced the gear oil a while back with 90 weight gear oil. I believe the roaring may be coming from the rear...

Let me start off with my level of knowledge in transmissions is nil. With that I have an issue and I am trying to figure out how and what I may need to do. I have a 1965 Barracuda automatic. I believe it is a 904 torqueflite I could be wrong. When driving the car the shift from first to...

Since the question was asked what type of oil to use in a manual transmission I figured it couldn't hurt to ask about an automatic. Do you use just regular ATF? I am currently using ATF.

Not sure if this is the right place but here goes. I have a 65 Barracuda and I think my rear wheel bearings have or are failing. How do I replace them? I see I can get them from my local parts place but I have no idea how to get to them.